Border OptionsHugging border, circle, square, or rectangle — with a 3mm satin stitch.
Backing OptionsAvailable with iron-on, sew-on, or velcro backing.
Fast ShippingShipped quickly from the USA.
Free Online Tools
Powerful embroidery utilities that save time and prevent costly mistakes.
Stitch AssistantRECOMMENDED
Get the exact stabilizer, machine settings, needle, and thread color sequence for every embroidery design you purchase — based on that design's stitch density, dimensions, and color count.
Create a charming applique frog windsock to brighten up your outdoor space. This delightful project features a playful frog design with vibrant green streamers that dance in the breeze. Perfect for adding a touch of fun to your garden or porch. Step-by-step instructions are included.
Hoop stabilizer and lay down a square of fabric about 5.5 x 5.5 inches.
Step 2:
Run tack down stitches. Run design.
Step 3:
For applique it will run placement stitches to let you know where to lay down the applique fabric.
Step 4:
Run to the end of the center or main design.
Step 5:
Lay a second square of fabric on the back of the hoop and tape to hold.
Step 6:
Run the zigzag stitches and stop. Trim the front and back fabric and return to machine and finish the satin stitches.
Step 7:
Carefully trim the excess stabilizer from around the square and set aside. Repeat so that you have a total of 4 blocks.
Step 8:
Using a regular sewing machine or needle and thread stitch 2 of the blocks together with a zigzag stitch.
Step 9:
Repeat with the remaining blocks, and then stitch them into a tube.
Step 10:
Cut from wide ribbon or fabric 4 strips about 2 x 6 inches and fold in ½ length wise. Pin these strips matching them to your seams and stitch to hold.
Step 11:
(Click Image to Enlarge)
From ribbon or fabric cut 8 strips about 2 x 18 inches. Pin to the bottom of the tube where desired and stitch to hold. Through the top loops run your cord for hanging.