The towels listed above are specifically for the monkey bathrobe. The amount of towels and colors for each critter bathrobes will be different. Please see here for suggested towel counts and colors. Please feel free to use any color of towels that you would like.
Step 1:
(Click Image to Enlarge)
Open and print the following using Adobe Acrobat or Adobe Reader:
Place the patterns on your hand towel and washcloth. Using a fabric marker, trace the outline of the templates on the towels.
(Place the patterns that need to be embroidered near the center if possible to make it easier to hoop and embroider them.)
Step 3:
(Click Image to Enlarge)
Embroider the design on the towels.
Monkey
Robe Hand - top side of bath towel on the top 2 corners (the fingers
should be facing the edge of the towel on each side. See Monkey layout
found in the Monkey CKB Pattern.pdf file)
Monkey Robe Face - inside 1 of the hood templates on hand towel
Monkey Robe Ear - inside 2 of the ear templates on the wash cloth
At this time you can also embroider other elements onto
the bath towel. For example: on the Ladybug you can embroider the dots
and flower(s).
Step 4:
(Click Image to Enlarge)
After all of the designs have been embroidered on the hand towel and
wash cloth, cut along the template lines you have made with the fabric
marker. You can also replace the template paper and use that as a guide
to cut the fabric with.
Step 5:
Place the front and back ear and tail pieces right sides together and
pin them. Then sew them together using 1/4" hem, leaving the bottom of
each open.
(Do not sew the hood together yet.)
(Click Image to Enlarge)
Step 6:
Turn the ears and tail right side out and stuff them. Use the dowel to
turn the tail inside out and to stuff it. Sew the ears and tail together
to keep the stuffing in.
(Click Image to Enlarge)
Step 7:
Hem the bottom of each hood piece separately with a 1/2" hem.
Step 8:
(Click Image to Enlarge)
Put the hood and ear pieces together.
Back of hood right side up
Ear pieces right side down
Front of hood right side down
Pin the hood and ears together.
Step 9:
Sew the hood and ears together with a 1/4" hem leaving the previously hemmed bottom section open.
(You can reinforce the hood by sewing a zigzag stitch back over the 1/4" hem you have just sewn.)
This is how the finished hood should look at this point.
Step 10:
(Click Image to Enlarge)
Place the bath towel right side down
and the hood right side up. Measure the bath towel so that you can
place the hood at the center top. Pin the back panel of the finished
hood to the towel.
Step 11:
Sew the hood onto the bath towel. Go over it twice to help reinforce it.
Step 12:
Hem all 3 sides of the hand pocket triangles using 1/4" to 1/2" hem.
(Click Image to Enlarge)
Step 13:
Pin the hand pockets to the back top 2 corners of the bath towel.
(Click Image to Enlarge)
Step 14:
(Click Image to Enlarge)
Sew the pockets onto the bath towel.
Step 15:
(Click Image to Enlarge)
Sew the tail to the bottom of the bath towel. See Monkey layout page for placement.
Starbird Inc. has been digitizing custom embroidery designs for over 25 years. They have seen so many wonderful and creative designs over the years that Starbird decided to create some of their own embroidery stock designs. Starbird Inc. is having a great time creating new and imaginative ideas and would like you to be able to enjoy them also.