Digitizing Fundamentals XIV Embroidery Project

The most important part of building a great design is the preparation that is done prior to using the computer. Spending time plotting out the sequence, identifying stitch types and choosing stitch control factors will save time and simplify the on-screen part of the digitizing job.

Design Analysis

The first step in digitizing is to sit back, get comfortable, and analyze the design from start to finish. Ask yourself these questions:

Separation By Color & Layer

The second step in planning a design is to break it down by color. The intent is to sew each color completely before moving on to the next one. However, that is not always possible due to the way the design is layered. Therefore, after breaking it down by color, continue breaking it down by layer.

Anchoring The Design

When possible, it is desirable to digitize the largest elements of a design first as this provides more stability or an “anchor”. When practical work from the largest elements down to the smallest elements. As every design is different, that may not always be possible, but it should be a basic rule-of-thumb. Keep in mind that a large element can affect smaller elements around it, but rarely will a small element affect larger ones that are nearby.

Developing A Roadmap

After analyzing and breaking down the design, the next step is to build a roadmap for the digitizing. This involves choosing the sew sequence, stitch types, stitch directions, stitch patterns, underlays, overlaps, push-pull compensation methods, etc.

All of this information should then be written down and used as a guide to follow while punching. If done properly, this will improve the efficiency of the job, while decreasing editing.

And now, you are ready to go to the computer.