Border OptionsHugging border, circle, square, or rectangle — with a 3mm satin stitch.
Backing OptionsAvailable with iron-on, sew-on, or velcro backing.
Fast ShippingShipped quickly from the USA.
Free Online Tools
Powerful embroidery utilities that save time and prevent costly mistakes.
Stitch AssistantRECOMMENDED
Get the exact stabilizer, machine settings, needle, and thread color sequence for every embroidery design you purchase — based on that design's stitch density, dimensions, and color count.
Create charming gingerbread house ornaments with this In-The-Hoop project. These festive decorations are perfect for your holiday tree, adding a touch of seasonal delight. Step-by-step instructions are included.
This is a collaboration between ITH Boutique and Emerson.
Step 1:
Step 1 :
For the First House tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 2:
Step 2 :
Cover the placement line with a ribbon with the help of the masking tape, and run color-stop 2.
(Click Image to Enlarge)
Step 3:
Step 3 :
Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stops 3 and 4.
(Click Image to Enlarge)
Step 4:
Step 4 :
Cover the placement line with printed fabric with the help of the repositionable adhesive spray, and run color-stops 5 and 6.
(Click Image to Enlarge)
Step 5:
Step 5 :
Run color-stop 7 through color-stop 14.
(Click Image to Enlarge)
Step 6:
Step 6 :
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with white fabric with the help of the repositionable adhesive spray and run color-stop 15.
(Click Image to Enlarge)
Step 7:
Step 7 :
Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 8:
Step 8 :
For the Second House tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 9:
Step 9 :
Cover the placement line with a ribbon with the help of the masking tape, and run color-stop 2.
(Click Image to Enlarge)
Step 10:
Step 10 :
Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stops 3 and 4.
(Click Image to Enlarge)
Step 11:
Step 11 :
Run color-stop 5 as a placement line. Cover the placement line with printed fabric with the help of the repositionable adhesive spray, and run color-stop 6. Cut the excess fabric.
(Click Image to Enlarge)
Step 12:
Step 12 :
Run color-stop 7 as a placement line. Cover the placement line with white fabric with the help of the repositionable adhesive spray, and run color-stop 8. Cut the excess fabric.
(Click Image to Enlarge)
Step 13:
Step 13 :
Run color-stop 9 through color-stop 17.
(Click Image to Enlarge)
Step 14:
Step 14 :
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with white fabric with the help of the repositionable adhesive spray and run color-stop 18.
(Click Image to Enlarge)
Step 15:
Step 15 :
Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 16:
Step 16 :
For the Third House tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 17:
Step 17 :
Cover the placement line with a ribbon with the help of the masking tape, and run color-stop 2.
(Click Image to Enlarge)
Step 18:
Step 18 :
Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stops 3 and 4.
(Click Image to Enlarge)
Step 19:
Step 19 :
Run color-stop 5 as a placement line. Cover the placement line with printed fabric with the help of the repositionable adhesive spray, and run color-stop 6. Cut the excess fabric.
(Click Image to Enlarge)
Step 20:
Step 20 :
Run color-stop 7 as a placement line. Cover the placement line with white fabric with the help of the repositionable adhesive spray, and run color-stop 8. Cut the excess fabric.
(Click Image to Enlarge)
Step 21:
Step 21 :
Run color-stop 9 through color-stop 16.
(Click Image to Enlarge)
Step 22:
Step 22 :
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with white fabric with the help of the repositionable adhesive spray and run color-stop 17.
(Click Image to Enlarge)
Step 23:
Step 23 :
Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 24:
Step 24 :
For the Fourth House tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 25:
Step 25 :
Cover the placement line with a ribbon with the help of the masking tape, and run color-stop 2.
(Click Image to Enlarge)
Step 26:
Step 26 :
Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stops 3 and 4.
(Click Image to Enlarge)
Step 27:
Step 27 :
Cover the placement line with printed fabric with the help of the repositionable adhesive spray, and run color-stop 5 through color-stop 7. Cut the excess fabric.
(Click Image to Enlarge)
Step 28:
Step 28 :
Run color-stop 8 through color-stop 15.
(Click Image to Enlarge)
Step 29:
Step 29 :
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with white fabric with the help of the repositionable adhesive spray and run color-stop 16.
(Click Image to Enlarge)
Step 30:
Step 30 :
Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 31:
Step 31 :
We put all the pieces together and enjoy this beautiful project.
