Border OptionsHugging border, circle, square, or rectangle — with a 3mm satin stitch.
Backing OptionsAvailable with iron-on, sew-on, or velcro backing.
Fast ShippingShipped quickly from the USA.
Free Online Tools
Powerful embroidery utilities that save time and prevent costly mistakes.
Stitch AssistantRECOMMENDED
Get the exact stabilizer, machine settings, needle, and thread color sequence for every embroidery design you purchase — based on that design's stitch density, dimensions, and color count.
Craft a festive Halloween atmosphere with this charming patch pumpkin door hanger. Perfect for adding a seasonal touch to your entryway, this design features cheerful jack-o'-lantern faces. Step-by-step instructions are included.
his is a collaboration between ITH Boutique and Emerson.
Step 1:
For the A01 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line. Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stop 2.
(Click Image to Enlarge)
Step 2:
Cover the placement line with orange fabric with the help of the repositionable adhesive spray, and run color stops 3 and 4. Cut the excess fabric.
(Click Image to Enlarge)
Step 3:
Run color-stop 5 through color-stop 7.
(Click Image to Enlarge)
Step 4:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with white fabric with the help of the repositionable adhesive spray and run color-stop 8.
(Click Image to Enlarge)
Step 5:
Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 6:
For the A02 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line. Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stop 2.
(Click Image to Enlarge)
Step 7:
Cover the placement line with orange fabric with the help of the repositionable adhesive spray, and run color stops 3 and 4. Cut the excess fabric.
(Click Image to Enlarge)
Step 8:
Run color-stop 5 as a placement line. Cover the placement line with green fabric with the help of the repositionable adhesive spray, and run color-stop 6. Cut the excess fabric.
(Click Image to Enlarge)
Step 9:
Run color-stop 7 through color-stop 9.
(Click Image to Enlarge)
Step 10:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with white fabric with the help of the repositionable adhesive spray and run color-stop 10.
(Click Image to Enlarge)
Step 11:
Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 12:
For the A03 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line. Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stop 2 and 3.
(Click Image to Enlarge)
Step 13:
Run color-stop 4 as a placement line. Cover the placement line with brown fabric with the help of the repositionable adhesive spray, and run color-stop 5. Cut the excess fabric.
(Click Image to Enlarge)
Step 14:
Run color-stop 6 as a placement line. Cover the placement line with green fabric with the help of the repositionable adhesive spray, and run color-stop 7. Cut the excess fabric.
(Click Image to Enlarge)
Step 15:
Run color-stop 8 as a placement line. Cover the placement line with green fabric with the help of the repositionable adhesive spray, and run color-stop 9. Cut the excess fabric.
(Click Image to Enlarge)
Step 16:
Run color-stop 10 through color-stop 12.
(Click Image to Enlarge)
Step 17:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with white fabric with the help of the repositionable adhesive spray and run color-stop 13.
(Click Image to Enlarge)
Step 18:
Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 19:
We put all the pieces together.
(Click Image to Enlarge)
Step 20:
With the help of a needle and thread or some type of textile glue, The A02 part will be the lower center part, and stick to the A01 part at the A02 part in the front part. Once the parts be joined, stick the A03 part to the A01 par at the height you prefer. Use complementary decoration. Have fun doing this beautiful project.
