Border OptionsHugging border, circle, square, or rectangle — with a 3mm satin stitch.
Backing OptionsAvailable with iron-on, sew-on, or velcro backing.
Fast ShippingShipped quickly from the USA.
Free Online Tools
Powerful embroidery utilities that save time and prevent costly mistakes.
Stitch AssistantRECOMMENDED
Get the exact stabilizer, machine settings, needle, and thread color sequence for every embroidery design you purchase — based on that design's stitch density, dimensions, and color count.
Create a festive atmosphere with this ITH Santa Claus door hanger, perfect for spreading holiday cheer. This charming design features Santa's face and adds a touch of Christmas magic to your home decor. Step-by-step instructions are included.
5” x 7” - 6” x 10” or an extra-large embroidery hoop.
Fabric in your favorite colors.
2.5-ounce Cut-away Stabilizer.
Batting.
Repositionable adhesive spray.
Fabric scissors.
Final Product: What You Will Create
Preface:
This is a collaboration between ITH Boutique and Emerson
Step 1:
For the A01 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop, run color-stop 1 as a placement line. Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stop 2 and 3.
(Click Image to Enlarge)
Step 2:
Run color-stop 4 as a placement line. Cover the placement line with red fabric with the help of the repositionable adhesive spray, and run color-stop 5. Cut the excess fabric.
(Click Image to Enlarge)
Step 3:
Run color-stop 6 as a placement line. Cover the placement line with yellow fabric with the help of the repositionable adhesive spray, and run color-stop 7. Cut the excess fabric.
(Click Image to Enlarge)
Step 4:
Run color-stop 8 and 9.
(Click Image to Enlarge)
Step 5:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with white fabric with the help of the repositionable adhesive spray and run color-stop 10.
(Click Image to Enlarge)
Step 6:
Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later
(Click Image to Enlarge)
Step 7:
For the A02 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop, run color-stop 1 as a placement line. Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stop 2 and 3.
(Click Image to Enlarge)
Step 8:
Cover the placement line with green fabric with the help of the repositionable adhesive spray, and run color-stop 4. Cut the excess fabric.
(Click Image to Enlarge)
Step 9:
Run color-stop 5 as a placement line. Cover the placement line with khaki fabric with the help of the repositionable adhesive spray, and run color-stop 6. Cut the excess fabric.
(Click Image to Enlarge)
Step 10:
Run color-stop 7 through color-stop 11.
(Click Image to Enlarge)
Step 11:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with white fabric with the help of the repositionable adhesive spray and run color-stop 12.
(Click Image to Enlarge)
Step 12:
Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 13:
For the A03 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop, run color-stop 1 as a placement line. Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stop 2 and 3.
(Click Image to Enlarge)
Step 14:
Cover the placement line with white fabric with the help of the repositionable adhesive spray, and run color-stop 4. Cut the excess fabric.
(Click Image to Enlarge)
Step 15:
Run color-stop 5.
(Click Image to Enlarge)
Step 16:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with white fabric with the help of the repositionable adhesive spray and run color-stop 6.
(Click Image to Enlarge)
Step 17:
Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 18:
For the A04 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop, run color-stop 1 as a placement line. Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stop 2 and 3.
(Click Image to Enlarge)
Step 19:
Cover the placement line with white fabric with the help of the repositionable adhesive spray, and run color-stop 4. Cut the excess fabric.
(Click Image to Enlarge)
Step 20:
Run color-stop 5 as a placement line. Cover the placement line with khaki fabric with the help of the repositionable adhesive spray, and run color-stop 6. Cut the excess fabric.
(Click Image to Enlarge)
Step 21:
Run color-stop 7 and 8.
(Click Image to Enlarge)
Step 22:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with white fabric with the help of the repositionable adhesive spray and run color-stop 9.
(Click Image to Enlarge)
Step 23:
Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 24:
We put all the pieces together.
(Click Image to Enlarge)
Step 25:
With the help of a needle and thread or some type of textile glue. The beard part will be the center part, joined with the mustache part, now stick the Santa face with the beard and mustache part. And finally, stick the hat at the height you prefer. Or as the reference image suggests.
