Border OptionsHugging border, circle, square, or rectangle — with a 3mm satin stitch.
Backing OptionsAvailable with iron-on, sew-on, or velcro backing.
Fast ShippingShipped quickly from the USA.
Free Online Tools
Powerful embroidery utilities that save time and prevent costly mistakes.
Stitch AssistantRECOMMENDED
Get the exact stabilizer, machine settings, needle, and thread color sequence for every embroidery design you purchase — based on that design's stitch density, dimensions, and color count.
Create a festive atmosphere with this charming In The Hoop reindeer door hanger. Perfect for welcoming guests during the holiday season, it adds a delightful touch to your home decor. Step-by-step instructions are included.
This is a collaboration between ITH Boutique and Emerson
Step 1:
For the A01 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line. Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stop 2 and 3.
(Click Image to Enlarge)
Step 2:
Cover the placement line with printed fabric with the help of the repositionable adhesive spray, and run color-stop 4. Cut the excess fabric.
(Click Image to Enlarge)
Step 3:
Run color-stop 5.
(Click Image to Enlarge)
Step 4:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with white fabric with the help of the repositionable adhesive spray and run color-stop 6.
(Click Image to Enlarge)
Step 5:
Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 6:
For the A02 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line. Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stop 2 and 3.
(Click Image to Enlarge)
Step 7:
Cover the placement line with brown fabric with the help of the repositionable adhesive spray, and run color-stop 4. Cut the excess fabric.
(Click Image to Enlarge)
Step 8:
Run color-stop 5 through color-stop 8. And run color-stop 9 as a placement line.
(Click Image to Enlarge)
Step 9:
Cover the placement line with red fabric with the help of the repositionable adhesive spray, and run color-stop 10. Cut the excess fabric.
(Click Image to Enlarge)
Step 10:
Cover the placement line with red fabric with the help of the repositionable adhesive spray, and run color-stop 10. Cut the excess fabric.
(Click Image to Enlarge)
Step 11:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with white fabric with the help of the repositionable adhesive spray and run color-stop 14.
(Click Image to Enlarge)
Step 12:
Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 13:
For the A03 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line. Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stop 2 and 3.
(Click Image to Enlarge)
Step 14:
Run color-stop 4 as a placement line. Cover the placement line with printed fabric with the help of the repositionable adhesive spray, and run color-stop 5. Cut the excess fabric.
(Click Image to Enlarge)
Step 15:
Run color-stop 6 as a placement line. Cover the placement line with printed fabric with the help of the repositionable adhesive spray, and run color-stop 7. Cut the excess fabric.
(Click Image to Enlarge)
Step 16:
Run color-stop 8 as a placement line. Cover the placement line with printed fabric with the help of the repositionable adhesive spray, and run color-stop 9. Cut the excess fabric.
(Click Image to Enlarge)
Step 17:
Run color-stop 8 as a placement line. Cover the placement line with printed fabric with the help of the repositionable adhesive spray, and run color-stop 9. Cut the excess fabric.
(Click Image to Enlarge)
Step 18:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with white fabric with the help of the repositionable adhesive spray and run color-stop 11.
(Click Image to Enlarge)
Step 19:
Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 20:
We put all the pieces together.
(Click Image to Enlarge)
Step 21:
With the help of a needle and thread or some type of textile glue. The scarf part will be the center part, joined with the reindeer head part, now stick the door hanger part to the reindeer head at the height you prefer. Or as the reference image suggests. Use complementary decoration.
