Border OptionsHugging border, circle, square, or rectangle — with a 3mm satin stitch.
Backing OptionsAvailable with iron-on, sew-on, or velcro backing.
Fast ShippingShipped quickly from the USA.
Free Online Tools
Powerful embroidery utilities that save time and prevent costly mistakes.
Stitch AssistantRECOMMENDED
Get the exact stabilizer, machine settings, needle, and thread color sequence for every embroidery design you purchase — based on that design's stitch density, dimensions, and color count.
Create a charming prehistoric decoration with this In The Hoop Sleeping Dinosaur Wall Hanging. Ideal for children's rooms, this whimsical design features a peacefully snoozing dinosaur resting on clouds. Step-by-step instructions are included.
4” x 4 - 5” x 7” - 6” x 10” or an extra-large embroidery hoop.
Fabric in your favorite colors.
2.5-ounce Cut-away Stabilizer.
Batting.
Repositionable adhesive spray.
Fabric scissors.
Final Product: What You Will Create
Preface:
This is a collaboration between ITH Boutique and Emerson.
Step 1:
For the A01 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line. Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stop 2.
(Click Image to Enlarge)
Step 2:
Cover the placement line with white fabric with the help of the repositionable adhesive spray, and run color-stops 3 and 4. Cut the excess fabric.
(Click Image to Enlarge)
Step 3:
Run color-stop 5.
(Click Image to Enlarge)
Step 4:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with white fabric with the help of the repositionable adhesive spray and run color-stop 6.
(Click Image to Enlarge)
Step 5:
Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 6:
For the A02 part, follow the same steps as the A01 part.
(Click Image to Enlarge)
Step 7:
For the A03 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line. Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stop 2.
(Click Image to Enlarge)
Step 8:
Cover the placement line with green fabric with the help of the repositionable adhesive spray, and run color-stops 3 through color-stop 5. Cut the excess fabric.
(Click Image to Enlarge)
Step 9:
Run color-stop 6.
(Click Image to Enlarge)
Step 10:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with white fabric with the help of the repositionable adhesive spray and run color-stop 7.
(Click Image to Enlarge)
Step 11:
Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 12:
For the A04 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line. Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stop 2.
(Click Image to Enlarge)
Step 13:
Cover the placement line with green fabric with the help of the repositionable adhesive spray, and run color-stops 3 through color-stop 6. Cut the excess fabric.
(Click Image to Enlarge)
Step 14:
Run color-stop 7.
(Click Image to Enlarge)
Step 15:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with white fabric with the help of the repositionable adhesive spray and run color-stop 8.
(Click Image to Enlarge)
Step 16:
Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 17:
For the A05 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line. Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stop 2 through color-stop 4.
(Click Image to Enlarge)
Step 18:
Cover the placement line with printed fabric with the help of the repositionable adhesive spray, and run color-stops 5 and 6. Cut the excess fabric.
(Click Image to Enlarge)
Step 19:
Run color-stop 7 as a placement line. Cover the placement line with yellow fabric with the help of the repositionable adhesive spray, and run color-stop 8. Cut the excess fabric.
(Click Image to Enlarge)
Step 20:
Run color-stop 9 as a placement line. Cover the placement line with yellow fabric with the help of the repositionable adhesive spray, and run color-stop 10. Cut the excess fabric.
(Click Image to Enlarge)
Step 21:
Run color-stop 11 and 12.
(Click Image to Enlarge)
Step 22:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with white fabric with the help of the repositionable adhesive spray and run color-stop 13.
(Click Image to Enlarge)
Step 23:
Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 24:
We put all the pieces together.
(Click Image to Enlarge)
Step 25:
The cloud will be the lower center part divided into two parts. With the help of a needle and thread or some type of textile glue, join the parts to form one, fixing the endings in the back parts. Fix the head of the baby dinosaur with the body. Then fix the little hat to the baby dinosaur, and finally join the baby dinosaur to the cloud. Join the project to a ribbon at the height you prefer. Or as the reference image suggests Use complementary decoration. Have fun doing this beautiful project.
