The best ITH Bunny in the Window ever! ITH Bunny in the Window is made with fabric, just take all the work out of the project. Make these in less than 90 minutes.
This is a collaboration between ITH Boutique and Emerson.
Step 1:
For the Window Right part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 2:
Remove the hoop from the machine, do not unhoop. Cover the placement line with batting and sky blue fabric with the help of the repositionable adhesive spray, and run color-stop 2 through color-stop 5.
(Click Image to Enlarge)
Step 3:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with sky-blue fabric with the help of the repositionable adhesive spray and run color-stop 6.
(Click Image to Enlarge)
Step 4:
Remove the project from the hoop. Cut out the outline of the design with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 5:
For the Window Left part, follow the steps for the window right part.
(Click Image to Enlarge)
Step 6:
For the Window Head part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 7:
Remove the hoop from the machine, do not unhoop. Cover the placement line with batting and sky blue fabric with the help of the repositionable adhesive spray, and run color-stop 2 through color-stop 4.
(Click Image to Enlarge)
Step 8:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with sky-blue fabric with the help of the repositionable adhesive spray and run color-stop 5.
(Click Image to Enlarge)
Step 9:
Remove the project from the hoop. Cut out the outline of the design with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 10:
For the Bunny part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 11:
Remove the hoop from the machine, do not unhoop. Cover the placement line with batting and white fabric with the help of the repositionable adhesive spray, and run color-stops 2 and 3.
(Click Image to Enlarge)
Step 12:
Run color-stop 4 as a placement line. Cover the placement line with pink fabric, and run color-stop 5. Cut the excess fabric.
(Click Image to Enlarge)
Step 13:
Run color-stop 6 as a placement line. Cover the placement line with pink fabric, and run color-stop 7. Cut the excess fabric.
(Click Image to Enlarge)
Step 14:
Run color-stop 8 as a placement line. Cover the placement line with lilac fabric, and run color-stop 9. Cut the excess fabric.
(Click Image to Enlarge)
Step 15:
Run color-stop 10 as a placement line. Cover the placement line with pink fabric, and run color-stop 11. Cut the excess fabric.
(Click Image to Enlarge)
Step 16:
Run color-stop 12 through color-stop 16.
(Click Image to Enlarge)
Step 17:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with white fabric with the help of the repositionable adhesive spray and run color-stop 17.
(Click Image to Enlarge)
Step 18:
Remove the project from the hoop. Cut out the outline of the design with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 19:
For the Flowers part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 20:
Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stops 2 and 3.
(Click Image to Enlarge)
Step 21:
Run color-stop 4 as a placement line. Cover the placement line with printed fabric, and run color-stop 5. Cut the excess fabric.
(Click Image to Enlarge)
Step 22:
Run color-stop 6 as a placement line. Cover the placement line with green light fabric, and run color-stop 7. Cut the excess fabric.
(Click Image to Enlarge)
Step 23:
Run color-stop 8 as a placement line. Cover the placement line with green fabric, and run color-stop 9. Cut the excess fabric.
(Click Image to Enlarge)
Step 24:
Run color-stop 10 as a placement line. Cover the placement line with green light fabric, and run color-stop 11. Cut the excess fabric.
(Click Image to Enlarge)
Step 25:
Run color-stop 12 as a placement line. Cover the placement line with green fabric, and run color-stop 13. Cut the excess fabric.
(Click Image to Enlarge)
Step 26:
Run color-stop 14 as a placement line. Cover the placement line with green light fabric, and run color-stop 15. Cut the excess fabric.
(Click Image to Enlarge)
Step 27:
Run color-stop 16 as a placement line. Cover the placement line with fuchsia fabric, and run color-stop 17. Cut the excess fabric.
(Click Image to Enlarge)
Step 28:
Run color-stop 18 as a placement line. Cover the placement line with printed fabric, and run color-stop 19. Cut the excess fabric.
(Click Image to Enlarge)
Step 29:
Run color-stop 20 as a placement line. Cover the placement line with printed fabric, and run color-stop 21. Cut the excess fabric.
(Click Image to Enlarge)
Step 30:
Run color-stop 22 as a placement line. Cover the placement line with red fabric, and run color-stop 23. Cut the excess fabric.
(Click Image to Enlarge)
Step 31:
Run color-stop 24 through color-stop 30.
(Click Image to Enlarge)
Step 32:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with printed fabric with the help of the repositionable adhesive spray and run color-stop 31.
(Click Image to Enlarge)
Step 33:
Remove the project from the hoop. Cut out the outline of the design with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 34:
We put all the pieces together.
(Click Image to Enlarge)
Step 35:
With the help of a needle and thread or some type of textile glue, Join the window head part, which will be the top center part, and the windows will be the center part. Join the part of the flowers and the bunny with the parts of the window, fixing the endings in the back parts as the reference image suggests.
