The best ITH Llama Dish Cloth Hanger ever! ITH Llama Dish Cloth Hanger is made with fabric, just take all the work out of the project. Make these in less than 60 minutes.
This is a collaboration between ITH Boutique and Emerson.
Step 1:
For the Llama part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 2:
Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stop 2.
(Click Image to Enlarge)
Step 3:
Remove the hoop from the machine, do not unhoop. Cover the placement line with white fabric with the help of the repositionable adhesive spray, and run color-stop 3 through color-stop 5.
(Click Image to Enlarge)
Step 4:
Run color-stop 6 as a placement line. Cover the placement line with green fabric with the help of the repositionable adhesive spray, and run color-stop 7. Cut the excess fabric.
(Click Image to Enlarge)
Step 5:
Run color-stop 8 as a placement line. Cover the placement line with brown fabric with the help of the repositionable adhesive spray, and run color-stop 9. Cut the excess fabric.
(Click Image to Enlarge)
Step 6:
Run color-stop 10 as a placement line. Cover the placement line with purple fabric with the help of the repositionable adhesive spray, and run color-stop 11. Cut the excess fabric.
(Click Image to Enlarge)
Step 7:
Run color-stop 12 as a placement line. Cover the placement line with printed fabric with the help of the repositionable adhesive spray, and run color-stop 13. Cut the excess fabric.
(Click Image to Enlarge)
Step 8:
Run color-stop 14 as a placement line. Cover the placement line with blue fabric with the help of the repositionable adhesive spray, and run color-stop 15. Cut the excess fabric.
(Click Image to Enlarge)
Step 9:
Run color-stop 16 through color-stop 26
(Click Image to Enlarge)
Step 10:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with white fabric with the help of the repositionable adhesive spray and run color-stop 27.
(Click Image to Enlarge)
Step 11:
Remove the project from the hoop. Cut out the outline of the design with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 12:
For the Hanger part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line
(Click Image to Enlarge)
Step 13:
Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stop 2 as a placement line.
(Click Image to Enlarge)
Step 14:
Cover the placement line with fuchsia fabric with the help of the repositionable adhesive spray. And run color-stop 3 and 4.
(Click Image to Enlarge)
Step 15:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with fuchsia fabric with the help of the repositionable adhesive spray and run color-stop 5.
(Click Image to Enlarge)
Step 16:
Remove the project from the hoop. Cut out the outline of the design, and the center part with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 17:
We put all the pieces together.
(Click Image to Enlarge)
Step 18:
With the help of a needle and thread or some type of textile glue. The Llama part will be the top center part, join to the hanger part at the height you prefer. Or as the reference image suggests. Use complementary decoration. Have fun doing this beautiful project
