Border OptionsHugging border, circle, square, or rectangle — with a 3mm satin stitch.
Backing OptionsAvailable with iron-on, sew-on, or velcro backing.
Fast ShippingShipped quickly from the USA.
Free Online Tools
Powerful embroidery utilities that save time and prevent costly mistakes.
Stitch AssistantRECOMMENDED
Get the exact stabilizer, machine settings, needle, and thread color sequence for every embroidery design you purchase — based on that design's stitch density, dimensions, and color count.
Create a charming in-the-hoop fabric flower wreath, perfect for adding a touch of spring to any room. This colorful wreath features three vibrant flowers in a decorative frame and can be completed in less than an hour. Step-by-step instructions are included.
For the first flower, tautly hoop a 2.5-ounce cutaway stabilizer in
your embroidery hoop and run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 2:
Remove the hoop from the machine, do not unhoop. Cover the
placement line with wadding, with the help of the repositionable
adhesive spray, and run color-stop 2 through color-stop 3. Cut off
the excess wadding.
(Click Image to Enlarge)
Step 3:
Cover the placement line for the leaves and stem with green
fabric, with the help of the repositionable adhesive spray, and run
color-stop 4. Cut off the excess fabric.
(Click Image to Enlarge)
Step 4:
Cover the placement line for the flower part with printed fabric,
with the help of the repositionable adhesive spray, and run
color-stop 5. Cut off the excess fabric.
(Click Image to Enlarge)
Step 5:
Cover the placement line in the center of the flower part with green
fabric, with the help of the repositionable adhesive spray, and run
color-stop 6 through color-stop 7. Cut off the excess fabric.
(Click Image to Enlarge)
Step 6:
Remove the project from the hoop, and cut out the design's outline
with sharp scissors. Look like this.
(Click Image to Enlarge)
Step 7:
For the second flower, follow the steps of the first flower. And look
like this.
(Click Image to Enlarge)
Step 8:
For the third flower, tautly hoop a 2.5-ounce cutaway stabilizer in
your embroidery hoop and run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 9:
Remove the hoop from the machine, do not unhoop. Cover the
placement line with wadding, with the help of the repositionable
adhesive spray, and run color-stop 2 through color-stop 3. Cut off
the excess wadding.
(Click Image to Enlarge)
Step 10:
Cover the placement line for the leaves and stem with green
fabric, with the help of the repositionable adhesive spray, and run
color-stop 4. Cut off the excess fabric.
(Click Image to Enlarge)
Step 11:
Cover the placement line for the flower part with printed fabric,
with the help of the repositionable adhesive spray, and run
color-stop 5. Cut off the excess fabric. And run color-stop 6
through color-stop 8.
(Click Image to Enlarge)
Step 12:
Remove the project from the hoop, and cut out the design's outline
with sharp scissors. Look like this.
(Click Image to Enlarge)
Step 13:
For the flower pot, tautly hoop a 2.5-ounce cutaway stabilizer in
your embroidery hoop and run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 14:
Remove the hoop from the machine, do not unhoop. Cover the
placement line with wadding and brown fabric with the help of the
repositionable adhesive spray, and run color-stop 2 through
color-stop 5. Cut off the excess fabric/wadding. And run color-stop
6.
(Click Image to Enlarge)
Step 15:
Remove the project from the hoop, and cut out the design's outline
with sharp scissors. Look like this.
(Click Image to Enlarge)
Step 16:
For the bottom wreath part tautly hoop 2.5-ounce cutaway
stabilizer in your embroidery hoop, and run color-stop 1 as a
placement line.
(Click Image to Enlarge)
Step 17:
Remove the hoop from the machine, do not unhoop. Cover the
placement line with wadding and printed fabric with the help of the
repositionable adhesive spray, and run color-stop 2 through
color-stop 4. Cut off the excess fabric/wadding. And run color-stop
5.
(Click Image to Enlarge)
Step 18:
Remove the project from the hoop, and cut out the design's outline
with sharp scissors. Look like this.
(Click Image to Enlarge)
Step 19:
For the top wreath, follow the steps from the bottom wreath. And
look like this.
(Click Image to Enlarge)
Step 20:
Remove the project from the hoop, cut out the design's outline
with sharp scissors and then put all the pieces together
(Click Image to Enlarge)
Step 21:
With the help of a needle and thread or some type of textile glue,
join the pieces as they are arranged in the image.
Use a ribbon or cord as a complementary decoration.
Have fun doing this beautiful project.
