ITH Festive Christmas Tree Decoration Embroidery Project

By Sew Chic on December 13, 2024

SKILL LEVELBeginner
TIME REQUIRED01:00

Description

Create a charming In the Hoop Christmas tree decoration featuring fabric and wadding. This festive piece is adorned with red poinsettias and plaid bows, making it a delightful addition to your holiday decor. Complete it in under 60 minutes. Step-by-step instructions are included.

Step of

Materials

Project Preview Video

Materials

5” x 7” and 6” x 10” embroidery hoop.

Grey, Dark Gray, White, and printed cloth Fabric Sheets Pcs.

2.5-ounce Cut-away Stabilizer.

Repositionable adhesive spray

Needle and white thread

Fabric scissors

Wadding

Designs used in this project

https://www.embroiderydesigns.com/productdetails/mira-embroidery/stockdesign/1/meithlg120

Preface:

This project is in collaboration with ITH Boutique and Laura workshop.

Step 1:

For the 001 Foglie part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop, and run color-stop 1 as a placement line.

Step 2:

Remove the hoop from the machine, do not unhoop. Cover the placement line with dark grey fabric and run color-stop 2 and color-stop 3 to fix the fabric.

Step 3:

Cut off the excess fabric and run color-stop 4 and color-stop 5.

Step 4:

Remove the project from the hoop.

Step 5:

Cut out the design's outline with sharp scissors, and save it for later.

Step 6:

Repeat the same process 2 times with the design called Foglie, once changing the color of the fabric and the color of the border to white.

Step 7:

For the 001 Petali part tautly hoop the 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line.

Step 8:

Remove the hoop from the machine, do not unhoop. Cover the placement line with printed fabric and run color-stop 2 and color-stop 3 to fix the fabric.

Step 9:

Cut off the excess fabric and run color-stop 4 and color-stop 5.

Step 10:

Remove the project from the hoop.

Step 11:

Cut out the design's outline with sharp scissors, and save it for later.

Step 12:

Repeat the same process 2 times with the design called Petali.

Step 13:

For the Tree 03 part tautly hoop the 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line.

Step 14:

Remove the hoop from the machine, do not unhoop. Cover the placement line with wadding and dark grey fabric. Run color-stop 2 through color-stop 5 to fix the fabric.

Step 15:

Cut off the excess fabric and run color-stop 6.

Step 16:

Remove the project from the hoop. Cut out the design's outline with sharp scissors, and save it for later.

Step 17:

For Tree 02 Repeat the same steps as in Tree 03 Changing the fabric and thread to grey.

Step 18:

For Tree 01 Repeat the same steps as in Tree 03 Changing the fabric and thread to white.

Step 19:

For the Banner part tautly hoop the 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line.

Step 20:

Remove the hoop from the machine, do not unhoop. Cover the placement line with printed fabric and run color-stop 2 through color-stop 6 to fix the fabric.

Step 21:

Cut off the excess fabric and run color-stop 7.

Step 22:

Remove the project from the hoop.

Step 23:

Cut out the design's outline with sharp scissors, and save it for later.

Step 24:

For the Banner part tautly hoop the 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 and color-stop 2 as a placement line.

Step 25:

Remove the hoop from the machine, do not unhoop. Cover the placement line with white fabric and run color-stop 3 to fix the fabric.

Step 26:

Remove the project from the hoop. Cut off the excess fabric. Cover the placement line with white fabric and run color-stop 4 to fix the fabric.

Step 27:

Remove the project from the hoop. Cut off the excess fabric and run color-stop 5 through color-stop 9.

Step 28:

Remove the project from the hoop and cut out the design's outline with sharp scissors.

Step 29:

It's time to put all the pieces together.

Step 30:

With the help of a needle and thread or textile glue, we join the pieces as shown in the image, and we add a fabric ribbon to decorate. Have fun doing this beautiful project.