The best ITH Swan with Garland! ITH Swan with Garland is made with fabric and wadding, just take all the work out of the project. Make these in less than 60 minutes.
This is a collaboration between ITH Boutique and Laura. The copyrights to digitizing belongs to Laura
Step 1:
For the top garland part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop, and run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 2:
Remove the hoop from the machine, do not unhoop. Cover the placement line with pink fabric and run color-stop 2 through color-stop 4 to fix the fabric.
(Click Image to Enlarge)
Step 3:
Cut off the excess fabric and run color-stop 5.
(Click Image to Enlarge)
Step 4:
Remove the project from the hoop. Cut out the design's outline with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 5:
For the bottom garland part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop, and run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 6:
Remove the hoop from the machine, do not unhoop. Cover the placement line with pink fabric and run color-stop 2 through color-stop 5 to fix the fabric.
(Click Image to Enlarge)
Step 7:
Cut off the excess fabric and run color-stop 6.
(Click Image to Enlarge)
Step 8:
Remove the project from the hoop. Cut out the design's outline with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 9:
For the Crown, tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop, run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 10:
Remove the hoop from the machine, do not unhoop. Cover the placement line with hot pink fabric and run color-stop 2 through color-stop 3 to fix the fabric.
(Click Image to Enlarge)
Step 11:
Cut off the excess fabric. Cover the placement line with hot pink fabric and run color-stop 4 and color-stop 5.
(Click Image to Enlarge)
Step 12:
Cut off the excess fabric and run color-stop 6 through color-stop 8.
(Click Image to Enlarge)
Step 13:
Remove the project from the hoop. Cut out the design's outline with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 14:
For the Cloud, tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop, run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 15:
Remove the hoop from the machine, do not unhoop. Cover the placement line with hot pink fabric and run color-stop 2 through color-stop 5 to fix the fabric.
(Click Image to Enlarge)
Step 16:
Cut off the excess fabric and run color-stop 6.
(Click Image to Enlarge)
Step 17:
Remove the project from the hoop. Cut out the design's outline with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 18:
For the Swan, tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop, run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 19:
Remove the hoop from the machine, do not unhoop. Cover the placement line with pink fabric and run color-stop 2 and color-stop 3 to fix the fabric.
(Click Image to Enlarge)
Step 20:
Cut off the excess fabric. Cover the placement line with hot pink fabric and run color-stop 4 and color-stop 5.
(Click Image to Enlarge)
Step 21:
Cut off the excess fabric. Cover the placement line with hot pink fabric and run color-stop 6 and color-stop 7.
(Click Image to Enlarge)
Step 22:
Cut off the excess fabric and run color-stop 8 through color-stop 13.
(Click Image to Enlarge)
Step 23:
Remove the project from the hoop. Cut out the design's outline with sharp scissors.
(Click Image to Enlarge)
Step 24:
It's time to put all the pieces together.
(Click Image to Enlarge)
Step 25:
With the help of a needle and thread or textile glue, we join the pieces as shown in the image, and we add feathers and fabric ribbon to decorate. Have fun doing this beautiful project.
