ITH Felt Easter Egg Holders Embroidery Project

By Sew Chic on March 07, 2025

SKILL LEVELBeginner
TIME REQUIRED00:30

Description

Create charming Easter egg holders in fun animal shapes with these easy in-the-hoop felt projects. Perfect for adding a festive touch to your Easter celebrations, each holder can be made in under 30 minutes. Step-by-step instructions are included.

Step of

Materials

Project Preview Video

Materials

6” x 10” or an extra-large embroidery hoop.

White, pink, and Yellow Felt Sheets 36 Pcs.

2.5-ounce Cut-away Stabilizer.

Repositionable adhesive spray

Silicone glue for crafts

Fabric scissors

Awl

Cutter or a razor blade

Designs used in this project

https://www.embroiderydesigns.com/productdetails/mira-embroidery/designs/1/meithlg111

https://www.embroiderydesigns.com/productdetails/mira-embroidery/designs/1/meithlg110

https://www.embroiderydesigns.com/productdetails/mira-embroidery/designs/1/meithlg109

https://www.embroiderydesigns.com/productdetails/mira-embroidery/designs/1/meithlg112

Final Product: What You Will Create

Preface:

This is a collaboration between ITH Boutique and Laura Workshop. The copyrights to the digitizing and some images belongs to Laura

Step 1:

For the Bunny version tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop.

Step 2:

Run the 1st and the second color-stop as a placement line for the white felt.

Step 3:

Remove the hoop from the machine, do not unhoop. Spray Repositionable adhesive on a rectangle of white felt and cover the placement line with it.

Step 4:

Repeat color-stop 1 and run color-stop 2 to fix the felt.

Step 5:

Run color-stop 3 through color-stop 15 to complete the embroidery.

Step 6:

Remove the project from the hoop.

Step 7:

Cut out the outline of the design with sharp scissors, leaving a homogeneous margin.

Step 8:

Cut a hole in the center of the felt following the outline.

Step 9:

With the help of an awl, open a hole inside the embroidered ring indicated in the image.

Step 10:

With the help of a cutter or a razor blade, cut through the indicated lines.

Step 11:

Fold the egg holder along with the middle outlines.
Insert a ribbon through the incisions made with the cutter on the back.

Pull the ends of the ribbon through the hole made with the awl and secure it with a bow.

You can attach the feet to the top with the help of Silicone glue for crafts. And enjoy.

Step 12:

For the chick version tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop. And follows the same instructions given between step 2 and step 4.

Step 13:

Step 14:

Run color-stop 3 through color-stop 15 to complete the embroidery.

Step 15:

Step 16:

Step 17:

Step 18:

Step 19:

Step 20:

Follow the same instructions given between step 6 and step 11 to finish this lovely egg holder.

Step 21:

For the little sheep version tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop. And follows the same instructions given between step 2 and step 4.