Border OptionsHugging border, circle, square, or rectangle — with a 3mm satin stitch.
Backing OptionsAvailable with iron-on, sew-on, or velcro backing.
Fast ShippingShipped quickly from the USA.
Free Online Tools
Powerful embroidery utilities that save time and prevent costly mistakes.
Stitch AssistantRECOMMENDED
Get the exact stabilizer, machine settings, needle, and thread color sequence for every embroidery design you purchase — based on that design's stitch density, dimensions, and color count.
Gather all supplies and review instructions before beginning. Print out paper design template.
(Click Image to Enlarge)
Step 2:
Open up one side seam of tote bag for easier hooping. Iron press tote.
(Click Image to Enlarge)
Step 3:
(Click Image to Enlarge)
Load embroidery design file into machine.
Step 4:
Find center of tote by folding in half vertically. Mark at top edge with straight pin. Center place design paper template onto tote 4” down from top edge. Mark axis points.
(Click Image to Enlarge)
Step 5:
Hoop stabilizer. Spray TAS. Center place tote matching marked axis points to hoop axis marking. Finger press and smooth to secure to stabilizer. Ensure excess bag fabric and handles are out of the stitching area.
(Click Image to Enlarge)
Step 6:
Attach hoop to machine. Confirm center needle placement. Make any necessary adjustments if needed. Begin design stitch out process. Embroidery design will take approx. 30 minutes based on a 700 SPM speed. ( SPM = Stitches Per minute) Design stitch out complete. Detach hoop from machine. Cut and trim all jump stitches and loose thread ends.
(Click Image to Enlarge)
Step 7:
Stitch up open side seam to close. Iron press. And you are done! Now off to the beach!
