Border OptionsHugging border, circle, square, or rectangle — with a 3mm satin stitch.
Backing OptionsAvailable with iron-on, sew-on, or velcro backing.
Fast ShippingShipped quickly from the USA.
Free Online Tools
Powerful embroidery utilities that save time and prevent costly mistakes.
Stitch AssistantRECOMMENDED
Get the exact stabilizer, machine settings, needle, and thread color sequence for every embroidery design you purchase — based on that design's stitch density, dimensions, and color count.
Gather all your materials and read through the instructions before you begin. Have a copy of the color sequence on hand for the embroidery stitch out.
(Click Image to Enlarge)
Step 2:
Cut your vinyl and felt into 5” squares, each square makes 1 coaster so cut enough to make as many coaster as you like.
(Click Image to Enlarge)
Step 3:
Hoop your stabilizer only, then apply spray adhesive to the back of the vinyl and position it in the middle of your hoop and press down to stick it to the stabilizer.
(Click Image to Enlarge)
Step 4:
Attach your hoop to your machine and stitch out the web design. Be sure to use a ball point needle when embroidering on vinyl
(Click Image to Enlarge)
Step 5:
Once the stitch out is complete, remove the hoop and tearaway the stabilizer from the back of the design.
(Click Image to Enlarge)
Step 6:
Lay the vinyl square over a piece of the felt, then on your sewing machine stitch around the last line of the web to secure the 2 layers together.
(Click Image to Enlarge)
Step 7:
Now cut around the web design, ensuring not to cut too close to the stitching line.