${{mainImageAlt || (productInfo._source && productInfo._source.name) || ''}}$

Adult Bib Embroidery Project

By Deborah Roome on May 02, 2016

SKILL LEVELSome Experience
TIME REQUIRED02:00
FINISHED SIZE21 x 27 inches

Description

Easy to sew fully lined and top stitched adult sized bib fastens around the neck with Velcro. It is embellished with an embroidery design of your choice and personalized with a name.

Step of

Materials

Project Preview Video

Materials

100% polyester material in your choice of design, 24"x 29"

Additional backing material of same material or another that will match

All purpose thread

Embroidery thread in coordinating colors

Scissors

Stick pins

1 in. piece of sew-in Velcro

A good pair of scissors

Designs used in this project

https://www.embroiderydesigns.com/productdetails/FESImports/1/IE2003575

Final Product: What You Will Create

Preface:

Select two layers of material to construct the adult bib. Both materials needs to measure at least 24"x29". Gather supplies and begin project.

Step 1:

Place fabric choice and lining choice right sides together on cutting surface with pattern on top. Securely pin together and then cut out bib.

Step 2:

Remove the pattern and pin the two materials together to begin stitching. Stitch around the entire perimeter only leaving a 4 inch opening at the bottom to be able to turn bib right side out after the next step.

Step 3:

Clip edges without cutting into the stitches. Turn right side out and press.

Step 4:

Top stitch around bib closing up the 4 in opening at the bottom and sew on the Velcro strips to secure neck edge.

Step 5:

Select an embroidery pattern of your choice and embellish the front of the bib as desired.

Projects You May Like

Meet the Author: Deborah Roome

Sole owner and operator of DmaStitches. A retired Christian woman who wants to work from home enjoying my passion for sewing and sharing my faith. Happily married grandmother of five.

Adult Bib Embroidery Project

Materials

Project Preview Video

Angel

Cut Away Stabilizer - 2.5 Oz wt.

Cut Away Stabilizer - 2 oz wt.