{{superHeaderAds.title}}
Live Chat
Embroidery Designs
Welcome, Embroiderer
Login
Christmas Card Photo Frames
{{mainImageAlt || (productInfo._source && productInfo._source.name) || ''}}

Christmas Card Photo Frames Embroidery Project

By   Stitchitize   on   December 14, 2015

PROJECT DETAILS

SKILL LEVEL
Some Experience
TIME REQUIRED
02:00
Description

Follow these easy instructions to sew and assemble a Photo Frame Ornament.

Project Preview Video

Materials
  • 5.5” x 8.0” B hoop
  • Dissolving Fabric Stabilizer for the Bow
  • Scrimfelt or other similar materials such as craft felt or drill for the card.
  • Glue gun or strong glue ie. Crazy glue
  • 1/4 inch hole punch
  • Scotch (transparent) tape
  • Wallet size photo

  • Designs used in this project

    Final Product: What You Will Create


    Step 1:
    Sewing the Photo Frame Ornament

    Sewing size of Photo Frame Ornament is @195mm Tall x 73mm Wide. You will need an “B” hoop to sew out this ornament.


    Step 2:
    Hoop up the scrimfelt in the Oversized hoop. Backing is not necessary unless sewing Card on a thin or lighter material. Sew out design and remove from hoop. Cut out the card following outer runstitch outline, then using a hobby knife trim out inside square opening following the inside runstitch detail. This is the opening for the photo.


    Step 3:
    Sewing the Freestanding Lace Bow
     
    Sewing size of Bow is @ 35 mm Tall x 73mm Wide.


    Step 4:
    Hoop 2 layers of dissolving stabilizer fabric. Sew entire design. Cut excess stabilizer from around edges of design. Dry flat by laying under 1 or 2 heavy books. Be sure that the design is thoroughly dry before using on Photo Frame Ornament. Rinse away remaining dissolving stabilizer following manufacturer's instructions.


    Step 5:
    Assembling the Photo Frame Ornament

    Position your photo in the frame from the back. Secure the photo in place using transparent tape on all sides. Begin folding the photo frame so that the front and back come together and line up evenly all around the edges. Spread glue evenly around the inside of the frame, then firmly press the front and back together until the glue is set. Insert the hole punch accurately into the red eyelet on the front top of the ornament, then punch out the front and back using a firm hand, to make the hole. Apply a small dab of glue under the hole eyelet on the front top of the card and affix the gold bow. Let dry. Form the hanger by inserting a ribbon and tie to the desired length.

    (Click Image to Enlarge)

    Meet the Author: Stitchitize
    Stitchitize
    The name Stitchitize was coined and registered in 1988 when the Conquergoods sold their first contract embroidery business. “Stitchitize” was coined as the art of digitizing stitches for machine embroidery. The company actually started developing embroidery designs in 1983 and soon saw the need for Stock Embroidery Designs. By 1988 the company had several thousand Stock Designs to sell, however the majority of their development was still geared towards the commercial embroidery market. It wasn’t until 2001 when Trevor, the Conquergoods eldest son, now managing Stitchitize, saw the opportunity to start developing designs for the emerging domestic embroidery market. In 2002 the Conquergoods opened a Sewing Centre selling domestic machines and embroidery models. The staff members that were hired for the Sewing Centre were all accomplished sewers and they worked very closely with the Stitchitize staff developing new designs. It soon became apparent that project based designs would be well received by the consumers. In late 2003 it was George Conquergood, the patriarch of the family that suggested the poem and storybook “Twas The Night Before Christmas” as a good place to start development. The manager of the Sewing Centre at that time, Brenda, was an accomplished artist and she was given the task to prepare the graphics for the storybook. Her drawings were then given to the digitizing department under direction of Beverley and her sister Linda the actual digitizer to execute. Another Sewing Centre staff member Darlene had the task of sewing the original prototypes, which eventually became an even bigger project. A quilt was also developed and Darlene and graphic artist Colin began the task of photographing and documenting every step of the construction process. Finally the collaborative efforts of eight staff members brought the project to completion and the production of the CD. To have the last word, George decided that as part of the product launch in 2004, Stitchitize would give every dealer a personalized copy of the storybook as a Christmas gift. The Conquergoods commercial production manager Darcy was brought in to discuss the logistics. Some of the pages in the book had over 24 colours and up to 42 color changes. Darcy was given the task to pleasingly reduce this to a maximum of 15 colours per page, as that was the maximum number of colours that their largest commercial machine could handle. He did this and started production of the over 200 books required. Darlene got to assemble all 200+ copies on a domestic sewing machine. The books were completed and sent out to all the dealers for Christmas 2004. The following year George suggested the development of the Mother Goose 1 & 2 Collection, which was so well received that a second collection, Mother Goose 3 & 4 was produced. The graphics and nursery rhymes came from the original book “Mother Goose and her Goslings” which had belonged to George’s mother when she was a child, and read to George as a child. That book is now over 100 years old. Other collaborative works included the FSL – 3D Flowers & Butterflies Collection, Italian Lace Collections, Mardi Gras Masks and the 13 Stitchitize Bees, which were fully tested by consumers in the Creative House Sewing Centre classrooms.
    More From This Author
    Link is Broken, Please check the URL
    Exclusive Embroidery Offers!
    Copyright © {{ currentDate | date:'yyyy'}} - EmbroideryDesigns.com
    GET 50% OFF! ×