${{mainImageAlt || (productInfo._source && productInfo._source.name) || ''}}$

ITH Lady Bug Wreath Embroidery Design Embroidery Project

By Sew Chic on June 26, 2026

PROJECT DETAILS

SKILL LEVEL

Beginner

TIME REQUIRED

01:30

Description

Create a fun and adorable LadyBug Wreath using an In The Hoop Embroidery design. This project is perfect for beginners or anyone looking for a quick and easy project. The LadyBug Wreath can be used as a decoration for your home or as a gift for a fri

Project Preview Video

Materials

4” x 4 - 5” x 7” - 6” x 10” or an extra-large embroidery hoop.

Fabric in your favorite colors.

2.5-ounce Cut-away Stabilizer.

Batting

Repositionable adhesive spray

Fabric scissors

Designs used in this project

https://www.embroiderydesigns.com/productdetails/mira-embroidery/stockdesign/1/meithde114

Final Product: What You Will Create

Preface:

This is a collaboration between ITH Boutique and Emerson.

Step 1:

For the A01 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line.

Step 2:

Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stop 2.

Step 3:

Remove the hoop from the machine, do not unhoop. Cover the placement line with red fabric with the help of the repositionable adhesive spray, and run color-stop 3 through color-stop 6.

Step 4:

Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with red fabric with the help of the repositionable adhesive spray and run color-stop 7.

Step 5:

Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.

Step 6:

For the A02 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line.

Step 7:

Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stop 2.

Step 8:

Remove the hoop from the machine, do not unhoop. Cover the placement line with khaki fabric with the help of the repositionable adhesive spray, and run color-stop 3 through color-stop 6.

Step 9:

Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with khaki fabric with the help of the repositionable adhesive spray and run color-stop 7.

Step 10:

Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.

Step 11:

For the A03 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line.

Step 12:

Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stop 2 and 3.

Step 13:

Run color-stop 4 as a placement line. Cover the placement line with green light fabric with the help of the repositionable adhesive spray, and run color-stop 5. Cut the excess fabric.

Step 14:

Run color-stop 6 as a placement line. Cover the placement line with green fabric with the help of the repositionable adhesive spray, and run color-stop 7. Cut the excess fabric.

Step 15:

Run color-stop 8 as a placement line. Cover the placement line with printed fabric with the help of the repositionable adhesive spray, and run color-stop 9. Cut the excess fabric.

Step 16:

Run color-stop 10 as a placement line. Cover the placement line with printed fabric with the help of the repositionable adhesive spray, and run color-stop 11. Cut the excess fabric.

Step 17:

Run color-stop 12 through color-stop 16.

Step 18:

Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with fuchsia fabric with the help of the repositionable adhesive spray and run color-stop 17.

Step 19:

Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.

Step 20:

For the A04 part, follow the steps of the A03 part. Invert the colors of the fabrics if you wish.☺

Step 21:

For the A05 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line.

Step 22:

Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stop 2 and 3.

Step 23:

Run color-stop 4 as a placement line. Cover the placement line with green light fabric with the help of the repositionable adhesive spray, and run color-stop 5. Cut the excess fabric.

Step 24:

Run color-stop 6 as a placement line. Cover the placement line with pink fabric with the help of the repositionable adhesive spray, and run color-stop 7. Cut the excess fabric.

Step 25:

Run color-stop 8 through color-stop 10.

Step 26:

Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with pink fabric with the help of the repositionable adhesive spray and run color-stop 11.

Step 27:

Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.

Step 28:

For the A06 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line.

Step 29:

Remove the hoop from the machine, do not unhoop. Cover the placement line with batting with the help of the repositionable adhesive spray, and run color-stop 2.

Step 30:

Remove the hoop from the machine, do not unhoop. Cover the placement line with black fabric with the help of the repositionable adhesive spray, and run color-stop 3.

Step 31:

Run color-stop 4 as a placement line. Cover the placement line with red fabric with the help of the repositionable adhesive spray, and run color-stop 5. Cut the excess fabric.

Step 32:

Run color-stop 6 as a placement line. Cover the placement line with khaki fabric with the help of the repositionable adhesive spray, and run color-stop 7. Cut the excess fabric.

Step 33:

Run color-stop 8 through color-stop 11.

Step 34:

Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with black fabric with the help of the repositionable adhesive spray and run color-stop 12.

Step 35:

Remove the project from the hoop. Cut out the outline of the design, with sharp scissors, and save it for later.

Step 36:

For the A07 part, follow the steps of the A06 part.

Step 37:

We put all the pieces together.

Step 38:

With the help of a needle and thread or some type of textile glue. The banner will be the upper center part. Join the part of the banner with the floral branches, fixing the endings in the back parts of the banner. The little flower will be in the center of the floral branches. Then fix the ladybugs one on each branch at the height you prefer. And the heart will be in the center of the banner. As the reference image suggests