he best Peace Love Gnome Key Fob! Peace Love Gnome Key Fob is made with fabric, just take all the work out of the project. Make these in less than 50 minutes
This is a collaboration between ITH Boutique and Emerson.
Step 1:
For the A01 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 2:
Remove the hoop from the machine, do not unhoop. Cover the placement line with batting and green fabric with the help of the repositionable adhesive spray, and run color-stop 2 through color-stop 6.
(Click Image to Enlarge)
Step 3:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with green fabric with the help of the repositionable adhesive spray and run color-stop 7.
(Click Image to Enlarge)
Step 4:
Remove the project from the hoop. Cut out the outline of the design with sharp scissors, and save it for later
(Click Image to Enlarge)
Step 5:
For the A02 part follow the steps of the A01 part.
(Click Image to Enlarge)
Step 6:
And Look like this
(Click Image to Enlarge)
Step 7:
For the A03 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 8:
Remove the hoop from the machine, do not unhoop. Cover the placement line with white fabric with the help of the repositionable adhesive spray, and run color-stop 2 and color-stop 3.
(Click Image to Enlarge)
Step 9:
Run color-stop 4 as a placement line.
(Click Image to Enlarge)
Step 10:
Cover the placement line with brown fabric with the help of the repositionable adhesive spray, and run color-stop 5
(Click Image to Enlarge)
Step 11:
Cut off the excess fabric. Run color-stop 6 through color-stop 12.
(Click Image to Enlarge)
Step 12:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with white fabric with the help of the repositionable adhesive spray and run color-stop 13.
(Click Image to Enlarge)
Step 13:
Remove the project from the hoop. Cut out the outline of the design with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 14:
For the A04 part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 15:
Cover the placement line with brown fabric with the help of the repositionable adhesive spray, and run color-stop 2 through color-stop 5.
(Click Image to Enlarge)
Step 16:
Remove the hoop from the machine, do not unhoop. Cover the back of the hoop with brown fabric with the help of the repositionable adhesive spray and run color-stop 6
(Click Image to Enlarge)
Step 17:
Remove the project from the hoop. Cut out the outline of the design with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 18:
We put all the pieces together.
(Click Image to Enlarge)
Step 19:
.
(Click Image to Enlarge)
Step 20:
With the help of a needle and thread or some type of textile glue, The top part will be the center part, in the same way, as the bottom part. Join the part of the bunny to the top part, fixing the endings in the back parts. Then fix the banner to the bottom part. Use complementary decoration. Have fun doing this beautiful project
