ITH Small Hand Purse Embroidery Project

For the back part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 as a placement line.

Remove the hoop from the machine, do not unhoop. Cover the placement line with brown fabric with the help of the repositionable adhesive spray, and run again color-stop 1 through color-stop 3.

Cut off the excess fabric.

Remove the project from the hoop, and cut out the outline of the design with sharp scissors.

For the front part tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run color-stop 1 through color-stop 4 as a placement line.

Remove the hoop from the machine, do not unhoop. Cover the placement line with a zipper and brown fabric as shown in the picture, with the help of duct tape and the repositionable adhesive spray.

Run again color-stop 4 through color-stop 8.

Cut off the excess fabric

Remove the hoop from the machine, do not unhoop. Cover the placement line with the back part with the help of the repositionable adhesive spray.

Run color-stop 9 through color-stop 11 to fix the fabric.

Remove the project from the hoop and cut out the outline of the design with sharp scissors.

With the help of scissors, carefully cut the stabilizer to reveal the part where the zipper is located.

Pull the top and bottom of the zipper to open it.

Turn it inside out as if you were turning a sock and you’re ready to go. Have fun doing this beautiful project.

.

.

.

.

.

.