The best ITH Christmas Tree ever! ITH Christmas Tree is made with fabric and wadding, just take all the work out of the project. Make these in less than 60 minutes.
This is a collaboration between ITH Boutique and Laura. The copyrights to digitizing belongs to Laura.
Step 1:
For the Banner tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run the 1st color-stop as a placement line.
(Click Image to Enlarge)
Step 2:
Remove the hoop from the machine, do not unhoop. Cover the placement line with wadding.
(Click Image to Enlarge)
Step 3:
Cover the wadding with white fabric and run color-stop 2 through color-stop 5.
(Click Image to Enlarge)
Step 4:
Cut off the excess fabric.
(Click Image to Enlarge)
Step 5:
Run color-stop 6.
(Click Image to Enlarge)
Step 6:
Remove the project from the hoop and cut out the outline of the design with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 7:
For the top of the tree tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run the 1st color-stop as a placement line.
(Click Image to Enlarge)
Step 8:
Remove the hoop from the machine, do not unhoop. Cover the placement line with wadding.
(Click Image to Enlarge)
Step 9:
Cover the wadding with printed fabric and run color-stop 2 through color-stop 5.
(Click Image to Enlarge)
Step 10:
Cut off the excess fabric.
(Click Image to Enlarge)
Step 11:
Run color-stop 6.
(Click Image to Enlarge)
Step 12:
Remove the project from the hoop.
(Click Image to Enlarge)
Step 13:
Cut out the outline of the design with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 14:
For the tree tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run the 1st color-stop as a placement line.
(Click Image to Enlarge)
Step 15:
Remove the hoop from the machine, do not unhoop. Cover the placement line with wadding.
(Click Image to Enlarge)
Step 16:
Cover the wadding with white fabric and run color-stop 2 through color-stop 4.
(Click Image to Enlarge)
Step 17:
Remove the project from the hoop.
(Click Image to Enlarge)
Step 18:
Cut out the design outline with sharp scissors, leaving a homogeneous margin.
(Click Image to Enlarge)
Step 19:
You will need 3 pieces of the tree.
(Click Image to Enlarge)
Step 20:
For the house tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run the 1st color-stop as a placement line.
(Click Image to Enlarge)
Step 21:
Remove the hoop from the machine, do not unhoop. Cover the placement line with wadding.
(Click Image to Enlarge)
Step 22:
Cover the wadding with printed fabric and run color-stop 2 and color-stop 3.
(Click Image to Enlarge)
Step 23:
Cut off the excess fabric.
(Click Image to Enlarge)
Step 24:
Run color-stop 4, cover the with white fabric, and run color-stop 5.
(Click Image to Enlarge)
Step 25:
Cut off the excess fabric.
(Click Image to Enlarge)
Step 26:
Run the color-stop 6 as a placement line.
(Click Image to Enlarge)
Step 27:
Cover with black fabric, and run color-stop 7.
(Click Image to Enlarge)
Step 28:
Cut off the excess fabric.
(Click Image to Enlarge)
Step 29:
Run the color-stop 8 as a placement line.
(Click Image to Enlarge)
Step 30:
Cover with printed fabric, and run color-stop 9.
(Click Image to Enlarge)
Step 31:
Cut off the excess fabric.
(Click Image to Enlarge)
Step 32:
Run color-stop 10 through color-stop 13.
(Click Image to Enlarge)
Step 33:
Remove the project from the hoop.
(Click Image to Enlarge)
Step 34:
Cut out the outline of the design with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 35:
For house 2 follow the same procedure between steps 20 and 34 and save it for later.
(Click Image to Enlarge)
Step 36:
For the bottom of the tree tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop and run the 1st color-stop as a placement line.
(Click Image to Enlarge)
Step 37:
Remove the hoop from the machine, do not unhoop. Cover the placement line with wadding.
(Click Image to Enlarge)
Step 38:
Cover the wadding with printed cloth fabric and run color-stop 2 through color-stop 5.
(Click Image to Enlarge)
Step 39:
cut off the excess fabric.
(Click Image to Enlarge)
Step 40:
Run color-stop 6.
(Click Image to Enlarge)
Step 41:
Remove the project from the hoop and cut out the outline of the design with sharp scissors.
(Click Image to Enlarge)
Step 42:
It's time to put the parts of the project together.
(Click Image to Enlarge)
Step 43:
With the help of a needle and thread or some type of textile glue, join the pieces as they are arranged in the image.
Have fun doing this beautiful project.
