The best ITH Teddy Bear Airplane Pilot! ITH Teddy Bear Airplane Pilot is made with fabric and wadding, just take all the work out of the project. Make these in less than 60 minutes
This is a collaboration between ITH Boutique and Laura. The copyrights to digitizing belongs to Laura workshop.
Step 1:
For the Stars tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop, run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 2:
Remove the hoop from the machine, do not unhoop. Cover the placement line with white fabric and run color-stop 2 and color-stop 3 to fix the fabric.
(Click Image to Enlarge)
Step 3:
Cut off the excess fabric and run color-stop 4.
(Click Image to Enlarge)
Step 4:
Remove the project from the hoop. Cut out the design's outline with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 5:
For the Bird tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop, run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 6:
Remove the hoop from the machine, do not unhoop. Cover the placement line with white fabric and run color-stop 3 and color-stop 4 to fix the fabric.
(Click Image to Enlarge)
Step 7:
Cut off the excess fabric and run color-stop 5 through color-stop 10.
(Click Image to Enlarge)
Step 8:
Remove the project from the hoop. Cut out the design's outline with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 9:
For the Banner tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop, run color-stop 1 as a placement line.
(Click Image to Enlarge)
Step 10:
Remove the hoop from the machine, do not unhoop. Cover the placement line with printed fabric and run color-stop 2 through color-stop 5 to fix the fabric.
(Click Image to Enlarge)
Step 11:
Cut off the excess fabric and run color-stop 6.
(Click Image to Enlarge)
Step 12:
Remove the project from the hoop. Cut out the design's outline with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 13:
For the Airplane tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop, run color-stop 1 through color-stop 3 as a placement line.
(Click Image to Enlarge)
Step 14:
Remove the hoop from the machine, do not unhoop. Cover the placement line with printed fabric and run color-stop 4 to fix the fabric. Then cut off the excess fabric.
(Click Image to Enlarge)
Step 15:
Remove the hoop from the machine, do not unhoop. Cover the placement line with black fabric and run color-stop 5 to fix the fabric. Then cut off the excess fabric.
(Click Image to Enlarge)
Step 16:
Remove the hoop from the machine, do not unhoop. Cover the placement line with brown fabric and run color-stop 6 to fix the fabric. Then cut off the excess fabric.
(Click Image to Enlarge)
Step 17:
Remove the hoop from the machine, do not unhoop. Cover the placement line with white fabric and run color-stop 7 to fix the fabric. Then cut off the excess fabric.
(Click Image to Enlarge)
Step 18:
Run color-stop 8 through color-stop 14.
(Click Image to Enlarge)
Step 19:
Remove the hoop from the hoop, cut out the design's outline with sharp scissors and save it for later.
(Click Image to Enlarge)
Step 20:
(Click Image to Enlarge)
For the teddy tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop, run color-stop 1 and color-stop 2 as a placement line.
Step 21:
(Click Image to Enlarge)
Remove the hoop from the machine, do not unhoop. Cover the placement line with brown fabric and run color-stop 3 to fix the fabric.
Step 22:
(Click Image to Enlarge)
Cut off the excess fabric and cover the placement line with brown fabric and run color-stop 4 to fix the fabric.
Step 23:
(Click Image to Enlarge)
Cut off the excess fabric and run color-stop 5 through color-stop 7.
Step 24:
(Click Image to Enlarge)
Remove the hoop from the machine, do not unhoop. Cover the placement line with white fabric and run color-stop 8 and color-stop 9 to fix the fabric.
Step 25:
Cut off the excess fabric and cover the placement line with printed fabric and run color-stop 10 and color-stop 11 to fix the fabric.
(Click Image to Enlarge)
Step 26:
Cut off the excess fabric and run color-stop 12 through color-stop 15.
(Click Image to Enlarge)
Step 27:
Remove the hoop from the hoop, and cut out the design's outline with sharp scissors.
(Click Image to Enlarge)
Step 28:
It's time to put all the pieces together.
(Click Image to Enlarge)
Step 29:
With the help of a needle and thread or textile glue, we join the pieces as shown in the image, we add a cord to join the banner with the airplane. Have fun making this beautiful project.
