The best Noah's Ark decoration ever! ITH Noah's Ark is made with fabric and wadding, just take all the work out of the project. Make these in less than 60 minutes
This is a collaboration between ITH Boutique and Laura Workshop. The copyrights to the digitizing & some images belongs to Laura
Step 1:
For the Top banner tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop.
(Click Image to Enlarge)
Step 2:
Run the 1st color-stop as a placement line.
(Click Image to Enlarge)
Step 3:
Remove the hoop from the machine, do not unhoop. Cover the placement line with wadding.
(Click Image to Enlarge)
Step 4:
Cover the wadding with khaki fabric.
(Click Image to Enlarge)
Step 5:
Run color-stop 2 to fix the fabric.
(Click Image to Enlarge)
Step 6:
Run color-stop 3 through color-stop 6.
(Click Image to Enlarge)
Step 7:
Cover the placement line with printed cloth fabric.
(Click Image to Enlarge)
Step 8:
Run color-stop 7 to fix the fabric.
(Click Image to Enlarge)
Step 9:
Run color-stop 8.
(Click Image to Enlarge)
Step 10:
Remove the hoop from the machine, do not unhoop. Cut off the excess fabric.
(Click Image to Enlarge)
Step 11:
Run color-stop 9 through color-stop 11.
(Click Image to Enlarge)
Step 12:
Remove the hoop from the machine, do not unhoop. Cut off the excess Khaki fabric.
(Click Image to Enlarge)
Step 13:
Run color-stop 12 through color-stop 13.
(Click Image to Enlarge)
Step 14:
Remove the project from the hoop.
(Click Image to Enlarge)
Step 15:
Cut out the outline of the design with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 16:
For the Bottom Banner hoop 2.5-ounce cutaway stabilizer in your embroidery hoop.
(Click Image to Enlarge)
Step 17:
Run the 1st color-stop as a placement line.
(Click Image to Enlarge)
Step 18:
Remove the hoop from the machine, do not unhoop. Cover the placement line with wadding.
(Click Image to Enlarge)
Step 19:
Cover the wadding with khaki fabric.
(Click Image to Enlarge)
Step 20:
Run color-stop 2 through color-stop 6.
(Click Image to Enlarge)
Step 21:
Remove the hoop from the machine, do not unhoop. Cut off the excess Khaki fabric.
(Click Image to Enlarge)
Step 22:
Run color-stop 7.
(Click Image to Enlarge)
Step 23:
Remove the project from the hoop.
(Click Image to Enlarge)
Step 24:
Cut out the outline of the design with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 25:
For the Tire hoop 2.5-ounce cutaway stabilizer in your embroidery hoop.
(Click Image to Enlarge)
Step 26:
Run the 1st color-stop as a placement line.
(Click Image to Enlarge)
Step 27:
Remove the hoop from the machine, do not unhoop. Cover the placement line with wadding.
(Click Image to Enlarge)
Step 28:
Cover the wadding with white fabric.
(Click Image to Enlarge)
Step 29:
Run color-stop 2 through color-stop 4.
(Click Image to Enlarge)
Step 30:
Remove the hoop from the machine, do not unhoop. Cut off the excess fabric.
(Click Image to Enlarge)
Step 31:
Run color-stop 5.
(Click Image to Enlarge)
Step 32:
Remove the project from the hoop.
(Click Image to Enlarge)
Step 33:
Cut out the outline of the design with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 34:
For the zebra tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop.
(Click Image to Enlarge)
Step 35:
Run the 1st color-stop as a placement line.
(Click Image to Enlarge)
Step 36:
Remove the hoop from the machine, do not unhoop. Cover the placement line wadding.
(Click Image to Enlarge)
Step 37:
Cover the wadding with white fabric.
(Click Image to Enlarge)
Step 38:
Run color-stop 2 to fix the fabric.
(Click Image to Enlarge)
Step 39:
Run color-stop 3 through color-stop 7.
(Click Image to Enlarge)
Step 40:
Remove the project from the hoop.
(Click Image to Enlarge)
Step 41:
Cut out the outline of the design with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 42:
For the Lion tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop.
(Click Image to Enlarge)
Step 43:
Run the 1st color-stop as a placement line.
(Click Image to Enlarge)
Step 44:
Remove the hoop from the machine, do not unhoop. Cover the placement line wadding.
(Click Image to Enlarge)
Step 45:
Cover the wadding with khaki fabric.
(Click Image to Enlarge)
Step 46:
Run color-stop 2 to fix the fabric.
(Click Image to Enlarge)
Step 47:
Run color-stop 3 through color-stop 6.
(Click Image to Enlarge)
Step 48:
Remove the project from the hoop.
(Click Image to Enlarge)
Step 49:
Cut out the outline of the design with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 50:
For the Elephant tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop.
(Click Image to Enlarge)
Step 51:
Run the 1st color-stop as a placement line.
(Click Image to Enlarge)
Step 52:
Remove the hoop from the machine, do not unhoop. Cover the placement line wadding.
(Click Image to Enlarge)
Step 53:
Cover the wadding with grey fabric.
(Click Image to Enlarge)
Step 54:
Run color-stop 2 to fix the fabric.
(Click Image to Enlarge)
Step 55:
Run color-stop 3 through color-stop 6.
(Click Image to Enlarge)
Step 56:
Remove the project from the hoop.
(Click Image to Enlarge)
Step 57:
Cut out the outline of the design with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 58:
For the Giraffe tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop.
(Click Image to Enlarge)
Step 59:
Run the 1st color-stop as a placement line.
(Click Image to Enlarge)
Step 60:
Remove the hoop from the machine, do not unhoop. Cover the placement line wadding.
(Click Image to Enlarge)
Step 61:
Cover the wadding with yellow fabric.
(Click Image to Enlarge)
Step 62:
Run color-stop 2 to fix the fabric.
(Click Image to Enlarge)
Step 63:
Run color-stop 3 through color-stop 8.
(Click Image to Enlarge)
Step 64:
Remove the project from the hoop.
(Click Image to Enlarge)
Step 65:
Cut out the outline of the design with sharp scissors, and save it for later.
(Click Image to Enlarge)
Step 66:
For the Banner tautly hoop 2.5-ounce cutaway stabilizer in your embroidery hoop.
(Click Image to Enlarge)
Step 67:
Run the 1st color-stop as a placement line.
(Click Image to Enlarge)
Step 68:
Remove the hoop from the machine, do not unhoop. Cover the placement line wadding.
(Click Image to Enlarge)
Step 69:
Cover the wadding with white fabric.
(Click Image to Enlarge)
Step 70:
Run color-stop 2 through color-stop 4.
(Click Image to Enlarge)
Step 71:
Cut the excess of fabric, run the color-stop 5 and remove the project from the hoop.
(Click Image to Enlarge)
Step 72:
Cut out the outline of the design with sharp scissors.
(Click Image to Enlarge)
Step 73:
It's time to put all the pieces together.
(Click Image to Enlarge)
Step 74:
(Click Image to Enlarge)
With the help of a needle and thread or some type of textile glue, join the pieces as they are arranged in the image and make sure to place a cord to hang it. Have fun doing this beautiful project.
