Zodiac Towel Set Embroidery Project

Gather all your materials and read through the instructions before you begin. Have a copy of the color sequence on hand for the embroidery stitch out. 

I chose towels with the band at the bottom for this project for a different look to the standard embroidered towel sets and I am embroidering on the bottom right corner of the band. Check the width of the embroidery design you choose, each zodiac name is different widths and lengths. I have then left a 5cm gap from the end of the embroidery to the edge of the towel so I measured in 15cms and marked at 5cms as my embroidery was 10cms long. 

I never hoop my towels, so I hoop my stabilizer then I position my towel ensuring that my chalk mark, which indicates the center of the embroidery design is centered in the hoop then pin to hold in place. I then attach my hoop to may machine and lay the topping film ontop of the where the embroidery will go and stitch out a tack down stitch to hold it all in place. 

Stitch out the design, then repeat for all other towels.

Your personalized towel set is now complete and an elegant addition to any bathroom