Kindness Cap Embroidery Project

Gather all supplies and review instructions before beginning. Time allotted of 30 minutes is for one cap.

Print out paper embroidery design template(s) 

Load "Be Kind" embroidery design into your machine. Resize if needed based on the size of your cap’s embroidering area per your machines instructions.  

Bend upwards the brim of your cap to help the embroidering area to lay flat onto stabilizer. Center paper design template and mark horizontal and vertical axis points.

Cut and hoop stabilizer. Mark horizontal and vertical axis points on stabilizer. Spray temporary adhesive spray onto stabilizer. 

Center hat onto stabilizer matching axis points. Be mindful if your cap has an inside brim lining to fold it back so it does not get caught when embroidering. (If needed reposition your design using your paper template and remark axis points) Fingertip press down and smooth out your embroidering area. I pinned back the embroidering area which also by using pins it will help to hold cap in place.  

Attach prepared hoop to machine. Confirm center needle placement. Begin the embroidering process. The “Be Kind” design uses one embroidery thread. Follow the thread color chart for this design or use your favorite color. Embroidering complete. Remove hoop from machine. Cut and trim all jump stitches and loose thread ends. Back and front. Carefully tear away stabilizer from back. And your cap is finished! Congratulations! 

Let’s make another cap to share using the “Kindness Is Free” embroidery design and spread a little kindness.