{{superHeaderAds.title}}
Live Chat
Embroidery Designs
Welcome, Embroiderer
Login
Funky Charm Bracelet & Earring Set
{{mainImageAlt || (productInfo._source && productInfo._source.name) || ''}}

Funky Charm Bracelet & Earring Set Embroidery Project

By   Stitchitize   on   April 29, 2015

PROJECT DETAILS

SKILL LEVEL
Some Experience
TIME REQUIRED
03:00
Description

Funky Charm Bracelet & Earring Set

Project Preview Video

Materials
  • 2 - 3 Polyester embroidery threads
  • 2 - 3 Bobbins
  • Applique fabric (18cm x 3cm - 7” x 1.25”)
  • Applique scissors - optional but very useful
  • 8 (6mm) Jump rings
  • 1 Bracelet clasp
  • Small Pliers
  • Choose 2 - 3 Polyester thread colors for your jewelry set and roll a bobbin for each.
  • Choose a piece of fabric for the applique in the bracelet. If the fabric chosen has a tendency to fray, or is very lightweight, it is recommended that you stabilize it first with iron-on fusible interfacing.

  • Designs used in this project

    Final Product: What You Will Create


    Step 1:
    Hoop 2 layers of water soluble stabilizer (H2O Gone, Sew ‘n’ wash, etc.) Be sure that it is very taut in the hoop. A cut-away “window” can be made and included in the hooping to add strength and stability in the hoop.


    Step 2:
    Thread machine and insert bobbin with embroidery thread color for the border on the bracelet. Sew 1st color stop in the design. This is your applique placement line. Trim thread.


    Step 3:
    Place applique fabric over placement line. No stitches should be visible. Sew 2nd color in the design. This is your applique cutline.


    Step 4:
    Remove hoop from machine and carefully cut applique fabric just outside the cutline stitches leaving approx. 2mm of fabric. It is important that you do not cut the stitches in the cutline but get close enough that the fabric edge is completely covered by the border that sews later. Applique scissors are very helpful here as they have a guard to prevent you from cutting the stitches.


    Step 5:
    Sew next color stop in the design. This is your tackdown stitches. When the machine stops, trim any loose or frayed threads from the edge of the applique. Be careful not to cut any tackdown stitches.


    Step 6:
    Thread machine and insert bobbin for the decorative stitches color on the bracelet. Sew the next color stop in the design.


    Step 7:
    Thread machine and insert bobbin for the border color. Sew the next color stop in the design. Thread machine and insert bobbin for the 3 flower charms and 3 heart charms.
     
    NOTE: We have added a color stop for each of the charms so that you can sew them in multiple colors, if desired. You will need to roll a bobbin for each charm color desired and insert it at the start of that charm in the sewing sequence. When all embroidery is complete, remove hoop from machine and trim all threads from the front and back. Cut the embroidery out of the water soluble stabilizer.


    Step 8:
    Immerse the embroidery in warm water to dissolve all of the stabilizer. Be sure to rinse well, if any stabilizer is left behind the bracelet will be stiff and uncomfortable to wear. Blot dry with paper towel. Try to remove as much water as possible at this stage. Place all pieces under a heavy hardcover book to flatten while drying. This could take up to 24 hours. Once dry, insert the tip of a pair of clipping scissors through the holes in the charms to fully open the holes. Open a 6mm jump ring (with small pliers) for each of the 6 charms. Choose 2 charms for the bracelet and close the jump rings through the center loop in the bracelet. Open 2 jump rings for the clasp. Slip one jump ring on each side of clasp and attach one to each side of the bracelet. Pair up the remaining 4 charms and close the jump rings onto earring hoops.


    Step 9:
    TIPS:
    *If your hoop allows, 2 sets can be sewn in one hooping by using your machine’s jog keys.
    *To add sparkle, jewels, beads, sequins, etc. can be sewn or glued to the bracelet or charms.
    *Metallic threads can be used for the charms but you must match up a polyester color for the bobbin. Do not put metallic thread in the bobbin.
    Meet the Author: Stitchitize
    Stitchitize
    The name Stitchitize was coined and registered in 1988 when the Conquergoods sold their first contract embroidery business. “Stitchitize” was coined as the art of digitizing stitches for machine embroidery. The company actually started developing embroidery designs in 1983 and soon saw the need for Stock Embroidery Designs. By 1988 the company had several thousand Stock Designs to sell, however the majority of their development was still geared towards the commercial embroidery market. It wasn’t until 2001 when Trevor, the Conquergoods eldest son, now managing Stitchitize, saw the opportunity to start developing designs for the emerging domestic embroidery market. In 2002 the Conquergoods opened a Sewing Centre selling domestic machines and embroidery models. The staff members that were hired for the Sewing Centre were all accomplished sewers and they worked very closely with the Stitchitize staff developing new designs. It soon became apparent that project based designs would be well received by the consumers. In late 2003 it was George Conquergood, the patriarch of the family that suggested the poem and storybook “Twas The Night Before Christmas” as a good place to start development. The manager of the Sewing Centre at that time, Brenda, was an accomplished artist and she was given the task to prepare the graphics for the storybook. Her drawings were then given to the digitizing department under direction of Beverley and her sister Linda the actual digitizer to execute. Another Sewing Centre staff member Darlene had the task of sewing the original prototypes, which eventually became an even bigger project. A quilt was also developed and Darlene and graphic artist Colin began the task of photographing and documenting every step of the construction process. Finally the collaborative efforts of eight staff members brought the project to completion and the production of the CD. To have the last word, George decided that as part of the product launch in 2004, Stitchitize would give every dealer a personalized copy of the storybook as a Christmas gift. The Conquergoods commercial production manager Darcy was brought in to discuss the logistics. Some of the pages in the book had over 24 colours and up to 42 color changes. Darcy was given the task to pleasingly reduce this to a maximum of 15 colours per page, as that was the maximum number of colours that their largest commercial machine could handle. He did this and started production of the over 200 books required. Darlene got to assemble all 200+ copies on a domestic sewing machine. The books were completed and sent out to all the dealers for Christmas 2004. The following year George suggested the development of the Mother Goose 1 & 2 Collection, which was so well received that a second collection, Mother Goose 3 & 4 was produced. The graphics and nursery rhymes came from the original book “Mother Goose and her Goslings” which had belonged to George’s mother when she was a child, and read to George as a child. That book is now over 100 years old. Other collaborative works included the FSL – 3D Flowers & Butterflies Collection, Italian Lace Collections, Mardi Gras Masks and the 13 Stitchitize Bees, which were fully tested by consumers in the Creative House Sewing Centre classrooms.
    More From This Author
    Link is Broken, Please check the URL
    Exclusive Embroidery Offers!
    Copyright © {{ currentDate | date:'yyyy'}} - EmbroideryDesigns.com
    GET 50% OFF! ×