{{superHeaderAds.title}}
Live Chat
Embroidery Designs
Welcome, Embroiderer
Login
Table Runner
{{mainImageAlt || (productInfo._source && productInfo._source.name) || ''}}

Table Runner Embroidery Project

By   Stitchitize   on   January 26, 2015

PROJECT DETAILS

SKILL LEVEL
Some Experience
TIME REQUIRED
03:00
Description

This Bee features step by step instructions to successfully multi-hoop and embroider with accuracy and ease.

Project Preview Video

Materials
  • 2 pieces of Fabric - 13" x 56" (33cm x 142cm) ** The same fabric can be used for both sides or 2 coordinating fabrics can be mixed.
  • 1 piece filler/quilt batting - 13" x 56" (33cm x 142cm) - (warm & white, warm & natural, armofleece, radiontex, etc.)
  • 1-2* pieces iron-on Fusible Interfacing - 13" x 56" (33cm x 142cm) *quantity depends on embroidery on 1 or 2 sides
  • Scissors (fabric and paper)
  • Rotary Cutter
  • Pins
  • Iron
  • Ruler
  • Masking tape
  • Cutting mat with grid or hooping aide
  • Point turner/presser
  • Standard sewing thread - to match fabric colours
  • Standard sewing foot
  • Embroidery hoop with minimum measurement 5" x 4" (125mm x 100mm)
  • Embroidery thread - 2 colours
  • Lightweight tear-away stabilizer - 6" x 24" (15cm x 61cm) for 8 embroidery placements
  • Standard embroidery foot
  • 1/4” seam foot (optional)
  • Embroidery designs Bee004A, Bee004B
  • Stitchitize Bee #4 Triangle Template
  • **Optional tassels for decoration

  • Designs used in this project

    Final Product: What You Will Create

    Preface:
    This Bee features step by step instructions to successfully multi-hoop and embroider with accuracy and ease. Embroider one side of this versatile table runner, and use a beautiful printed fabric for the reverse or embroider both sides for 2 completely different looks. It can change from formal to informal, with the seasons, occasions, tableware, or decor. Our fabric requirements make a finished size of 12" x 55".



    Fabric Preparation

    Iron Fusible interfacing to wrong side of each of the pieces of fabric to be embroidered.


    Step 1:
    Embroidery Placement Marking

    To mark BOTH of the table runner ends for embroidery placement, measure 5" up from ends AND 4" in from edge of each side. Place a piece of masking tape and mark with a crosshair at these 4 spots.


    (Click Image to Enlarge)
    Diagram for embroidery placement.


    Step 2:
    To mark for embroidery placement at the center of the table runner, fold the table runner in half lengthways. Measure 5" away from center both ways AND 4" in from edge of each side. Place a piece of masking tape and mark with a crosshair at these 4 spots.


    Step 3:
    Hooping and Embroidery
     
    To hoop each of these 8 placements for embroidery, place and align your embroidery hoop with the grid on the cutting mat. 

    (Click Image to Enlarge)



    Step 4:
    Center a LEFT SIDE crosshair placement mark as close to hoop center as possible (use plastic hoop insert to help find center of hoop). Use the grid on the cutting mat to align the fabric so that it is straight.


    Step 5:
    Carefully hoop the fabric with the top of the hoop towards the center of the table runner and attach the hoop to your machine. Slide a piece of lightweight tear-away stabilizer under the hoop.

    (Click Image to Enlarge)



    Step 6:
    Prepare machine to sew Bee004A. Use your "jog" keys to move the hoop to the correct position where the needle passes through the crosshair. Remove the masking tape and sew the design.

    (Click Image to Enlarge)



    Step 7:
    Follow the hooping steps to prepare to sew the RIGHT SIDE end design. Prepare machine to sew Bee004A again, but first you must use your edit screen to mirror (horizontal) the design.
     
    Repeat this process to sew 2 designs at placement marks on opposite end of the table runner. To embroider the center placements, repeat the process starting with a LEFT SIDE crosshair placement mark and use the embroidery design Bee004B.

    (Click Image to Enlarge)

     



    Sewing Sequences

    Bee004a - End Placements
    1) 2 small swirls (our sample uses a chocolate brown)
    2) 4 large swirls (our sample uses a blue teal)

    Bee004b - Center Placements
    1) 2 swirls (our sample uses a chocolate brown)
    2) 3 swirls (our sample uses a blue teal)



    Construction


    Press embroidered fabric piece(s). Fold widthways. Measure and mark 51/2" up from the end of the fabric on the raw edge.


    Step 8:
    Line up a ruler from the tip at the fold to the 5 1/2" mark and cut with a rotary blade. Repeat for opposite end of fabric, both ends of second piece of fabric and filler/batting. Roll bobbin and thread machine with matching thread to your fabrics. Attach standard sewing foot. 

    (Click Image to Enlarge)



    Step 9:
    Pin quilt batting to wrong side of embroidered piece of fabric.

    (Click Image to Enlarge)



    Step 10:
    Trim any excess fusible stabilizer or quilt batting from edges. Attach 1/4” seam foot or standard sewing foot. Using a 1/4" seam allowance, baste (on fabric side) all the way around. Tip: Put your machine in needle down position. This will help to pivot at the corners. 


    Step 11:
    Trim away batting in the seam allowance. Pin both pieces of fabric right sides together marking a 5" opening.


    Step 12:
    With standard sewing foot attached, using a 1/2" seam allowance, sew both pieces together. Trim seams to 1/4” and clip 3 points on each end. Use pointer turner to poke/straighten out points. Turn right side out and press.


    Step 13:

    Slip stitch to close opening. Tip: Attach seam guide if available to sew a perfect 1/2” top stitch around your Table Runner.


    Step 14:
    Top stitch around the runner 1/2" from the edge.


    Step 15:
    Press again!

    (Click Image to Enlarge)

     


    Suggestions:
     
    *Embroider one side, use printed fabric for reverse.
    *Embroider one side with supplied designs and reverse with other designs (Seasonal, Themed, etc.)
    *Reduce length and omit center embroidery for matching placemats.
    *Add piping or cording around edge.
    *Reduce or increase length to suit any table.
    *Beads, tassels, or other embellishments can be attached for added pizzazz.
    *Substitute a subtle decorative stitch for the topstitch.

    (Click Image to Enlarge)

    Meet the Author: Stitchitize
    Stitchitize
    The name Stitchitize was coined and registered in 1988 when the Conquergoods sold their first contract embroidery business. “Stitchitize” was coined as the art of digitizing stitches for machine embroidery. The company actually started developing embroidery designs in 1983 and soon saw the need for Stock Embroidery Designs. By 1988 the company had several thousand Stock Designs to sell, however the majority of their development was still geared towards the commercial embroidery market. It wasn’t until 2001 when Trevor, the Conquergoods eldest son, now managing Stitchitize, saw the opportunity to start developing designs for the emerging domestic embroidery market. In 2002 the Conquergoods opened a Sewing Centre selling domestic machines and embroidery models. The staff members that were hired for the Sewing Centre were all accomplished sewers and they worked very closely with the Stitchitize staff developing new designs. It soon became apparent that project based designs would be well received by the consumers. In late 2003 it was George Conquergood, the patriarch of the family that suggested the poem and storybook “Twas The Night Before Christmas” as a good place to start development. The manager of the Sewing Centre at that time, Brenda, was an accomplished artist and she was given the task to prepare the graphics for the storybook. Her drawings were then given to the digitizing department under direction of Beverley and her sister Linda the actual digitizer to execute. Another Sewing Centre staff member Darlene had the task of sewing the original prototypes, which eventually became an even bigger project. A quilt was also developed and Darlene and graphic artist Colin began the task of photographing and documenting every step of the construction process. Finally the collaborative efforts of eight staff members brought the project to completion and the production of the CD. To have the last word, George decided that as part of the product launch in 2004, Stitchitize would give every dealer a personalized copy of the storybook as a Christmas gift. The Conquergoods commercial production manager Darcy was brought in to discuss the logistics. Some of the pages in the book had over 24 colours and up to 42 color changes. Darcy was given the task to pleasingly reduce this to a maximum of 15 colours per page, as that was the maximum number of colours that their largest commercial machine could handle. He did this and started production of the over 200 books required. Darlene got to assemble all 200+ copies on a domestic sewing machine. The books were completed and sent out to all the dealers for Christmas 2004. The following year George suggested the development of the Mother Goose 1 & 2 Collection, which was so well received that a second collection, Mother Goose 3 & 4 was produced. The graphics and nursery rhymes came from the original book “Mother Goose and her Goslings” which had belonged to George’s mother when she was a child, and read to George as a child. That book is now over 100 years old. Other collaborative works included the FSL – 3D Flowers & Butterflies Collection, Italian Lace Collections, Mardi Gras Masks and the 13 Stitchitize Bees, which were fully tested by consumers in the Creative House Sewing Centre classrooms.
    More From This Author
    Link is Broken, Please check the URL
    Exclusive Embroidery Offers!
    Copyright © {{ currentDate | date:'yyyy'}} - EmbroideryDesigns.com
    GET 50% OFF! ×