SEARCH
SUGGESTIONSClose
{{term.text}}
PRODUCTSView Results
{{prd._source.name}} {{prd._source.displayName}} {{prd._source.displayName}}
by {{prd._source.brand}}
{{prd._source.sKU}}
{{prd._source.definitionName | productType}}
Not Yet Rated
Search Options
Would you like to search using your current filters below?
  • {{value}}
Yes   No

Wet Wipes Case

(Click to View All Images)


Materials
  • Tear-away stabilizer
  • Fabric of your choice
  • Plastic Coil Zipper at least 9” long or longer
  • Threads of your choice 
  • Wet Wipes with flip open top. Huggies® Clean Team 42 count is what I use and it fits perfectly. Any of the wipes that are 42 to 50 count should fit with no problem. The plastic flip lids are close to the same size with most brands.
  • Wet Wipes Case designs - you will need to purchase both a top and a bottom design to create this project

  • Designs used in this project


    Final Product: What You Will Create
     


    Step 1:
    Prepare Fabric:
    1. Cut 2 pieces of fabric 9”x 9”
    2. Take on of the pieces and cut it in half long ways (this will be the back 2 pieces. After cutting, fold over about 1/2” and press flat with iron.
    3- Find the center of the 9”x 9” square and cut a small slit down center. This will help in removing the fabric center later on.


    Step 2:
    Stitch top of case first top of wet wipe holder.
    1- Hoop your stabilizer. Place hoop on machine and lay fabric over top making sure it covers the entire area of the hoop and slit you cut is in the center of hoop.
    2- Stitch first CC1. This is will tack down fabric in place. Next, stitch center. It’s best to use thread same color as fabric in this step.

    (Click Image to Enlarge)



    Step 3:
    After the center stitching is done, remove hoop from machine and slip end of scissors into the little cut you made in the fabric before hooping and trim center fabric, cutting as close to the stitching as possible without cutting thread or stabilizer. Only trim away the fabric.

    (Click Image to Enlarge)



    Step 4:
    Place hoop back on machine and stitch CC2, this is the quilt type pattern. Next CC3 is the satin finish around the center. You can use contrasting colors to match your fabric.

    (Click Image to Enlarge)



    Step 5:
    The rest of the Color Changes are the designs around the corners. Follow color chart or do your own thing. You can skip putting the design on at this point if you would like it left with only the quilt stitching on it. Remove top from hoop and trim around stitching leaving about 1" or so extra, don't trim too close as it has to fit over top of the back and have fabric overlap so it can be stitched to the bottom of the case. Remove stabilizer from center.


    Step 6:
    Instructions for back of wet wipe holder. Stitch CC1. This will be the placement for the zipper. Hoop stabilizer and place hoop on machine.

    (Click Image to Enlarge)



    Step 7:
    Place closed zipper (face up) over the placement lines, so that the coil lies on top of the center. Also center the zipper in the hoop so that the metal pull and the closed end lie outside the stitching area. The zipper pull must be at the bottom and the zipper end at the top. See picture below. Embroider CC2 to attach the zipper to the stabilizer.

    (Click Image to Enlarge)



    Step 8:
    Place the folded left side of bag bottom on top of the design ( fabric side up), as shown (below left), so that the folded edge is up against the zipper coil (below left).

    (Click Image to Enlarge)



    Step 9:
    Secure in place with adhesive spray if needed. CC 3 attaches the left fabric to the stabilizer (below right). Place other piece of fabric on right and then stitch CC4. This will tack down right side.

    (Click Image to Enlarge)



    Step 10:
    Will do the Decorative quilt stitching.

    (Click Image to Enlarge)

     


    Step 11:
    Now the last step – Unzip the zipper about a 1/3 way down so it is in the center area of design. You must do this or you can’t open your holder when finished. With top right side facing down, center and line up top. Once in place lightly hold in place and start machine. This will sew the back and front together.

    (Click Image to Enlarge)



    Step 12:
    Remove from hoop and trim excess fabric. Remove stabilizer from back of zipper and turn right side out.

    (Click Image to Enlarge)



    Step 13:
    Your holder is ready for the wet wipes.

    (Click Image to Enlarge)



    Share this project:     
    Meet The Author: Bonnieta Tatro
    Hi! I am Bonnie, I was born in West Virginia, but raised in Cleveland Ohio. Graphics digitizer, commercial embroiderer & business owner. After living from Maine to Alaska in the Navy, we have settled in the country, so I have space for my three rescued alpacas. I began sewing at the age of 7, never learned to use a pattern so nearly failed home economics in junior high! For over 22 years I designed and created porcelain dolls and their costumes, ranging from antique reproductions to modern style dolls. I also sculpted several of my own dolls and taught classes. I have been married almost 26 years now! We have two sons. Both boys, Daniel 23 and Jason 21, were home schooled and are currently attending college. My husband and I are active in our church and mission programs as he currently chairs a partnership of churches working in West Africa. We have also trained and led young adult mission teams working in Peru the past seven years. My family is an active supporter of the local Boy Scout troops, having raised two Eagle scouts. I occasionally travel out of the country with my husband while he goes to meet with other governments. While he works I get to see all the sites and museums :0) We have been to Germany, United Kingdom, Netherlands and Africa. I am looking forward to Sweden this spring. My digitizing “career” actually began 7 years ago when I purchased a home embroidery machine and software package. I self learned the software as I found out after they had no one that really new anything about the software they were selling so I became proficient in a very short time and the local store asked me to teach classes. This went on for a few years while I expanded my knowledge of the industry and determined it was time to obtain a commercial machine and software package and in doing so I started my embroidery business. I do custom embroidery for local businesses and home embroiderer’s and digitize for Designsbysick.com. I enjoy working with Shawn and Linda as I am able to be more creative with my digitizing and expand on my ideas. My husband supported this “business” change, as I sold my doll business and “focused” on embroidery, but he does think sometimes that he has lost me to the computer!

    Feedback
    Rate this Project: Awful Poor Average Good Excellent    Not Yet Rated
    | |
    SHOPPING CART
    Contains 0 Item
    RECEIVE SPECIALS AT...
    Sign Up
    Scroll to Top Image
    New Message Alert
    New Message(s)
    Your custom digitizing order(s) has 1 new message(s) waiting for you. Please read immediately and respond to expedite the processing of your order(s).
    Read Message Now
    CLOSE