SEARCH
SUGGESTIONSClose
{{term.text}}
PRODUCTSView Results
{{prd._source.name}} {{prd._source.displayName}} {{prd._source.displayName}}
by {{prd._source.brand}}
{{prd._source.sKU}}
{{prd._source.definitionName | productType}}
Not Yet Rated
Search Options
Would you like to search using your current filters below?
  • {{value}}
Yes   No

ITH Light Bloom Mug Rugs

(Click to View All Images)


Materials
  • For 1 mug mat:
  • 5” x 7” embroidery hoop or larger
  • 2 9” x 7” rectangles of BasicGrey White Paper Grunge® quilting cotton for the face and back of the mat
  • 9” x 7” Battilizer® or low loft batting
  • 2 ½” x 42” strip of coordinating solids or prints for binding
  • Cut-away stabilizer to fit the hoop
  • Spray adhesive
  • Water soluble thread
  • Craft Clips

  • Designs used in this project

    Final Product: What You Will Create

    Preface:
    I usually give the dimensions for the binding strips to be cut at 2 ¼”, but in this project the binding strips are cut at 2 ½”. This is to allow extra binding to cover the wider seam allowance left on the blocks when they are cut to size. This is to maximize the size of mug mat made in a 5” x 7” hoop. 


    Step 1:
    Cut the fabrics per the materials list above. Tautly hoop the stabilizer in the embroidery hoop.


    Step 2:
    (Click Image to Enlarge)
    Run the first color stop (CS) in a neutral color as a placement line.


    Step 3:
    (Click Image to Enlarge)
    Spray adhesive on the white fabric and position over the placement line so that the fabric exceeds the placement line by 1” on all sides. Tack the fabric to the stabilizer with water soluble thread with CS 2. Water soluble thread is used for the tack down stitches now and at the end of the project so that these stitches can be removed with a damp cloth in the event that the binding does not cover them when the project is completed. If you are sure of your binding skills you can run this color stop with white thread.


    Step 4:
    (Click Image to Enlarge)
    Follow the color chart to embroider the design. Do not stitch the last two color stops yet.


    Step 5:
    (Click Image to Enlarge)
    Remove the hoop from the machine; do not unhoop; place the hoop face down on a flat surface; spray adhesive on the rectangle of Battilizer® and place over the back of the hoop so that the edges of the Battilizer® exceed the original placement line by 1” on all sides; spray adhesive on the back fabric and align right side up over the Battilizer®.


    Step 6:
    (Click Image to Enlarge)
    Return the hoop to the machine, make sure the back fabrics remain smoothed on the back of the hoop. Run the next to last CS in water soluble thread to tack down the back fabrics.
    Run the final CS in white thread to quilt the mug mat.


    Step 7:
    (Click Image to Enlarge)
    Trim all edges of the block to ½” from the water soluble tack down stitches.


    Step 8:
    (Click Image to Enlarge)
    Following the instructions in the article Binding Small Embroidery Projects . Stitch the 2 ½” binding folded in half lengthwise with a ¼” seam to the back of the mug mat. This will give you approximately ½” of binding to fold to the front of the mat to meet up with the water-soluble tack down lines.  


    Step 9:
    Congratulations your Light Bloom Mug Rug is complete! Make all 8 as great gifts and craft fair items.

    For the love of embroidery…
    Pat Williams


    Share this project:     
    Meet The Author: Pat Williams
    Award winning Digitizer, Embroidery Educator, Author and a Consultant to the Industry, Pat Williams has 20 years of experience in the embroidery industry. Pat has won multiple awards for her digitizing expertise including the 2007 Impressions Awards Grand Championship, Best of Show as well as the 1st and 2nd Place Awards.. Pat’s love of digitizing has afforded her the opportunity to write many articles for Impressions magazine in the United States and Images Magazine in Europe. She also has authored her own digitizing training CD series, “Digitizing Steps to Success.” In 2001 Pat was named “Embroidery Educator of the Year.” For many years Pat lead digitizing seminars at the ISS Shows in Long Beach, CA and for Compucon software. Pat retired from the commercial embroidery arena in 2010. She now resides in Sierra Vista, AZ. She can be reached at pwilliams22@cox.net.

    Feedback
    Rate this Project: Awful Poor Average Good Excellent    Not Yet Rated
    | |
    SHOPPING CART
    Contains 0 Item
    RECEIVE SPECIALS AT...
    Sign Up
    Scroll to Top Image
    New Message Alert
    New Message(s)
    Your custom digitizing order(s) has 1 new message(s) waiting for you. Please read immediately and respond to expedite the processing of your order(s).
    Read Message Now
    CLOSE